Table of Contents
Advertisement
Using the Printer Driver Under Windows 95/98/NT 4.0
Portrait
Portrait documents are printed lengthwise (vertically), relative to the
page.
Landscape
Landscape documents are printed widthwise (horizontally), relative to
the page.
Collate
The Collate feature supports multi-document printing (when the
number of copies being output is two or more). The
group mode (1,1,1...2,2,2...3,3,3). When the Collate setting is
documents are sorted as they are output (1,2,3...1,2,3...1,2,3).
Note
• Make sure that the Collate function of other applications is set to off.
Paper Source
The
Paper Source
from the printer. To change this setting, just select the desired paper
source from the drop-down list. If the desired tray is an option and does
not appear as a paper source, make sure that it has been added in the
tab.
Device Option
You can specify to print the first of a multi-page document from a tray
separate from the rest of the document. To specify a first page from a
separate tray, check the
the desired tray from the
Note
• When
Paper Source
driver must match the
Control Panel, otherwise a Size Mismatch error will occur. See "Using
the Control Panel" on page 5-7.
item specifies the tray from which paper is fed
Different paper for 1st page
drop-down list.
1st Page
is set to Tray1, the paper size set in the printer
Tray1 Paper Size
setting is a
Off
box and select
in the
Tray1 Setting
On
,
of the
4-29
Advertisement
Table of Contents
