Table of Contents
Advertisement
9
9.2
General printing problems
Problem
No output
For further information and assistance...
can be found in the Internet at www.minolta-qms.com/support
9.3
Print quality problems
If you are having problems with print quality, follow these steps:
Remove the toner cartridge and gently shake it back and forth to dis-
tribute the remaining toner evenly.
Remove the toner cartridge and check for damage. If necessary,
replace with a new cartridge. See page 8-2.
Remove the drum cartridge and check for damage. If necessary,
replace with a new cartridge. See page 8-6.
Clean the inside of the printer. See page 8-10.
Deactivate the Toner Save feature in the print menu and try another
sample printout. See page 4-6.
9-8
Possible cause
The printer is not connected to
the power supply, or the cable is
not connected to the printer.
The printer is not turned on.
You are using the wrong type of
interface cable.
The computers communication
port settings are not correct for
your printer.
The parallel port on your
computer is also being used for
other equipment (for example, a
scanner, ZIP drive).
Troubleshooting
Action
Check the power connection and
the interface connection to the
printer.
Turn on the printer.
Check whether the interface
cable type conforms to the
specifications (see chapter 10).
Check the computer's
communication port settings.
Refer to the documentation that
comes with your computer and
check if its current
communication port settings are
correct.
Disconnect the other equipment
and operate the printer via this
port.
Advertisement
Table of Contents
