Tv Observation And Photomicrography; Selecting The Camera Adapter Magnification; Attaching The Camera Adapter; Selecting The Tv Camera Light Path - Olympus MVX10 Instructions Manual

TV OBSERVATION AND PHOTOMICROGRAPHY

}When TV observation or photomicrography is required, use the MVX-TTRS tilting trinocular head or MVX-TLU tilting lens
unit.
The MVX-TV1XB/MVX-TV1XC/TV0.63XC exclusive camera adapter can be installed on this microscope.
}When the MVX-TV0.63XC camera adapter is used, insufficiency of brightness in the peripheral section may sometimes
be noticeable at low to intermediate zoom ratios. In this case, stop down the aperture iris diaphragm knob on the front
of the microscope body.
1

Selecting the Camera Adapter Magnification

Set the magnification of the camera adapter according to the size of the CCD in the TV camera or digital camera.
The following figures show the TV observation areas when the WHN10X-H eyepieces with a field diameter of 22 are used.
When the 0.63X camera adapter is used
(The field may be cut off when the 1-inch CCD is used)
²
18
@
³
Fig. 16
1-in. CCD
2/3-in. CCD
1/2-in. CCD
Field Number 22
2

Attaching the Camera Adapter

}Attach the camera adapter to the camera first, and mount the camera
adapter to the tube.
}For procedures to attach the camera adapter to the camera, refer to
Instruction Manual provided with the camera.
1. Using the Allen screwdriver, fully loosen the straight tube clamping screw
@ of the straight tube mount on the top of the tilting trinocular head.
2. Fit the round dovetail ² of the camera adapter into the straight tube
mount of the trinocular head, and tighten the clamping screw @.
3

Selecting the TV Camera Light Path

Pull out the light path selector knob ³ to select the TV & Photo 100%
light path setting.
When the 1X camera adapter is used
(Fig. 16)
(Fig. 16)