16
Device Description
3.3.2
230V Supply
As a system supply (electrical supply for both the motors as well as the control
electronics), the sunblind box needs 230 V alternating voltage.
The power supply is handled by the three-pole plug connector with the
designation "230 V." The connection is fused with a 6.3 A fuse.
Table 4: Connection of 230V supply
Connection
Figure 5: Connection of 230V supply
3.3.3
Motors
The motors are each connected to the box via a four-pole plug ("M1" to "M4");
here a uniform rotational direction connection and the correct operation direction
must be observed.
Table 5: Motor connection
Connection
Figure 6: Motor connection
770-629/130-000 WINSTA® Sunblind Box 4 Channel
Designation Function
Designation Function
Version 1.2.0, valid from HW/FW version XXXX0201XX
WAGO WINSTA® 770
L
L
PE
PE
N
N
1
Up
2
Down
PE
PE
N
N
Manual