Vibration; Shock; Protection - B&R Panel PC 2100 User Manual

2.2.2.3 Vibration

The following table provides an overview of the maximum vibration values of the complete system. Limitations are
possible through the use of individual components.
Panel PC
With CFast card
1) Testing is performed in accordance with EN 60068-2-6.
2) This value applies to a device in its original packaging.

2.2.2.4 Shock

The following table provides an overview of the maximum shock values of the complete system. Limitations are
possible through the use of individual components.
Panel PC
With CFast card
1) Testing is performed in accordance with EN 60068-2-27.
2) This value applies to a device in its original packaging.

2.2.2.5 Protection

The Panel PC 2100 has IP65 protection on the front and IP20 protection on the back per EN 60529 under the
following conditions:
• The Panel PC 2100 is installed correctly (see
• All covers or components are installed on the interfaces and slots.
• All environmental conditions are being observed.
The Panel PC 2100 with AP9x3 and AP1000 panels also has "Type 4X indoor use only" protection on the front
per UL 50 under the same conditions.
Panel PC 2100 user's manual V1.17
Operation
1)
Continuous Periodic
2 to 9 Hz: 2 to 9 Hz:
1.75 mm amplitude 3.5 mm amplitude
9 to 200 Hz: 0.5 g 9 to 200 Hz: 1 g
Table 29: Vibration
Operation
1)
15 g, 11 ms
Table 30: Shock
"Installation" on page
Storage
1)2)
2 to 8 Hz: 7.5 mm amplitude
8 to 200 Hz: 2 g
200 to 500 Hz: 4 g
Storage
1)2)
30 g, 6 ms
210).
Technical data
Transport
1)2)
2 to 8 Hz: 7.5 mm amplitude
8 to 200 Hz: 2 g
200 to 500 Hz: 4 g
Transport
1)2)
30 g, 6 ms
41