B&R Panel PC 2100 User Manual page 69

2.2.6.2.4 12.1" devices
The cutout tolerance for PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 systems is ±0.5 mm.
The cutout tolerance for the AP1000 is +0 mm / -0.5 mm.
PP100/200/300/400
PP500
12.1" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100%
mounting compatible with Power Panel 100/200/300/400 devices in Horizontal1 format. The Power Panel 300/400
and Power Panel 100/200 devices require a cut that is 1.5 mm wider (left and right).
The larger cutout can be used for all devices under certain conditions:
• When mounting, make sure that the AP1000, AP900, PPC700 and PP500 devices are placed and mounted
as close to the center of the cutout as possible.
Panel PC 2100 user's manual V1.17
10 AP900, PPC700, PP500, AP1000
8.5 PP100/200/300/400
1.5
Outer contour of device
Cutout for PP100/200/300/400 device
Cutout for AP900/PPC700/PP500/AP1000 device
Figure 38: Mounting compatibility - 12.1" device - Horizontal1
10 AP900, PPC700, PP500, AP1000
8.5 PP100/200/300/400
362 x 284
345 x 267
342 x 267
Technical data
8.5
AP900/PPC700
AP1000
8.5
1.5
69