B&R Panel PC 2100 User Manual page 217

Commissioning
2. Fasten the clamping blocks to the wall or control cabinet by alternately tightening the screws with a 3 mm
hex key screwdriver. Tightening the screw presses down the integrated clamping lever to hold the device
securely in place. The tightening torque should be max. 0.5 Nm to provide an optimal seal.
2 - 10 mm
Wall or
control cabinet plate
Figure 119: Fastening the clamping blocks (sample figure)
Panel PC 2100 user's manual V1.17 217