Sata Configuration - B&R Panel PC 2100 User Manual

Software

4.1.6.7 SATA configuration

BIOS setting Explanation
Chipset SATA Option for configuring SATA support.
Chipset SATA mode Option for configuring supported serial
ATA connections.
SATA port 0 hot plug capa- Option for configuring hot plugging for SATA in-
bility terface 0.
SATA port 1 hot plug capa- Option for configuring hot plugging for SATA in-
bility terface 1.
260
Figure 157: Advanced - SATA configuration
Configuration options
Table 247: Advanced - SATA configuration
Effect
Enabled
Provides support for SATA devices.
Disabled No support for SATA devices.
IDE Uses the serial ATA hard drive as a parallel ATA
physical drive. It is not possible to configure the
SATA port.
AHCI
The AHCI setting enables the internal memory
driver for SATA functions, which increases the
storage performance for random read-write ac-
cess by allowing the drive itself to determine the
sequence of commands.
Enabled Enables hot plugging for SATA interface 0. De-
vices can be connected/disconnected during
operation.
Disabled Disables hot plugging for SATA interface 0.
Enabled Enables hot plugging for SATA interface 1. De-
vices can be connected/disconnected during
operation.
Disabled Disables hot plugging for SATA interface 1.
Panel PC 2100 user's manual V1.17