B&R Panel PC 2100 User Manual page 66

Technical data
5.7" Power Panel 500 devices and Power Panel 100/200/300/400 devices are 100% mounting compatible in the
Horizontal2 format.
PP100/200/300/400
PP500
5.7" Automation Panel 1000 and Power Panel 500 devices are not 100% mounting compatible with Power Panel
100/200/300/400 devices in the Vertical1 format. Automation Panel 1000 and Power Panel 500 devices require a
cutout that is 5.2 mm higher (bottom edge).
The larger cutout can be used for all devices under certain conditions:
• When mounting, make sure that the PP100/200/300/400 devices are placed and mounted as close to the
center of the cutout as possible. Failure to do so can prevent the retaining clips from holding firmly, which
means that a solid seal is no longer guaranteed by the gasket (IP65).
66
6.5
PP100/200/300/400
PP500
Figure 33: Mounting compatibility - 5.7" device - Horizontal2
6.5
Outer contour of device
Cutout for PP100/200/300/400 device
Cutout for PP500/AP1000 device
Figure 34: Mounting compatibility - 5.7" device - Vertical1
302 x 187
289 x 174
Outer contour of device
Cutout for device
212 x 245
199 x 226.8
199 x 232
6.5
6.5
6.5
6.5
6.5
AP1000
11.7 PP100/200/300/400
6.5 PP500, AP1000
Panel PC 2100 user's manual V1.17