General Information; Manual History - B&R Panel PC 2100 User Manual

1 General information

Information:
This user's manual is not intended for end customers! It is the responsibility of the machine manufac-
turer or system provider to provide the safety guidelines relevant to end customers in the operating
instructions for the end customer in the respective local language.

1.1 Manual history

Version Date
1.00 2014-10-23
1.05 2015-02-13
1.10 2016-01-29
1.11 2016-03-16
Panel PC 2100 user's manual V1.17
Change
• First version
• Updated section "Certifications" on page
•
Updated section "Automation Runtime" on page
• Updated interface options 5ACCIF01.FPLS-000 and 5ACCIF01.FPSC-000, see
page 158.
•
Updated terminal block for IF options
• Updated "Windows Embedded 8.1 Industry Pro" on page
• Updated 5CFAST.032G-10, 5CFAST.064G-10 and 5CFAST.128G-10 CFast cards, see
page 147.
• Updated section 3.1.5 "Installation information for individual
• Updated section 4.1.10 "Allocation of
•
Modified section "Minimum ambient temperature for worst-case operation" on page
• Corrected section "LED status indicators" on page
•
Updated "B&R Key Editor" on page
• Updated AP1000 display units, see
•
Updated interface options
"5ACCIF01.FPLK-000" on page
on page 206.
•
Updated max. cable length for USB 2.0 in section
• Updated "Maximum ambient temperature for typical operation" on page
•
Updated section "Ambient temperature during storage and transport" on page
• Updated section "Power calculation" on page
• Modified section "Protection" on page
•
Updated BIOS to V1.23, see
• Updated section "Upgrade information" on page
• Revised overview of "Windows Embedded 8.1 Industry
Standard 7".
• Updated section about Debian 8, see "Debian (GNU/Linux)" on page .
• Updated section "Automation Runtime Embedded (ARemb)" on page
•
Updated Technology Guard (HID) 0TG1000.02 and Automation Runtime Embedded Terminal TG
1TG4601.06-T, see "Automation Runtime" on page
• Updated "B&R KCF Editor" on page
(5SWUTI.0001-000).
• Updated chapter 5 "Standards and
•
Updated section "UL Haz. Loc. Certifications" on page and UL HazLoc certification for technical data of
certain individual components.
• Updated section "DNV GL certification " on page
•
Updated section "Mounting orientations" on page
• Updated color of Ethernet connector LEDs, see
2 interface (ETH2)" on page
• Updated "Windows 10 IoT Enterprise 2015 LTSB" on page
•
Updated section "General instructions for performing temperature testing" on page 226
"Commissioning".
• Revised section "Temperature specifications" on page
•
Updated section "Known problems / Issues" on page
• Harmonized RAM specifications in the technical data for
Table 1: Manual history
304.
288.
"0TB1210.3100" on page
280.
components".
resources".
55.
300.
"AP1000 panels" on page
"5ACCIF01.FPCC-000" on page 158,
173, "5ACCIF01.FPSC-001" on page 194
"USB interfaces" on page
43.
41.
"BIOS options" on page 234.
271.
Pro",
288.
301. Updated
certifications".
305.
30.
"Ethernet 1 interface (ETH1)" on page 51
51.
277.
32.
233.
"Interface options" on page
General information
"Interface options" on
316.
"CFast cards" on
34.
92.
"5ACCIF01.FPLS-001" on page
and "5ACCIF01.ICAN-000"
52.
35.
37.
"Windows 7" and "Windows Embedded
289.
"HMI Service Center" on page 302
and "Ethernet
in chapter
158.
183,
3
11