2.3.5.3.3.3 LED status indicators - L1, L2, L3
3 LEDs are integrated on the interface option.
LED
Color
Status
L1
Green
On
Blinking
L2
Green
On
Blinking
L3
Green-Red
On
Off
LED "Status/Error"
LED "Status/Error" is a green and red dual LED. The LED states have a different meaning depending on the
operating mode.
Ethernet mode
In this mode, the interface is operated as an Ethernet interface.
Green - Status
On
POWERLINK
Red - Error
On
Panel PC 2100 user's manual V1.17
LED status indicators
Explanation
POWERLINK 2 Link LED
Indicates a connection to a POWERLINK net-
work.
POWERLINK 2 Link LED
Data transfer in progress.
POWERLINK 1 Link LED
Indicates a connection to a POWERLINK net-
work.
POWERLINK 1 Link LED
Data transfer in progress.
POWERLINK Status/Error LED
See
"LED
"Status/Error"".
POWERLINK Status/Error LED
See
"LED
"Status/Error"".
Table 150: 5ACCIF01.FPLK-000 - LED status indicators
Description
The interface is being operated as an Ethernet interface.
Table 151: LED "Status/Error" - Ethernet mode
Description
The interface is in an error state (failed Ethernet frames, increased number of collisions on the network, etc.).
If an error occurs in the following states, then the green LED blinks over the red LED:
•
BASIC_ETHERNET
•
PRE_OPERATIONAL_1
•
PRE_OPERATIONAL_2
•
READY_TO_OPERATE
Status
Green
Error
Red
LED "S/E"
Table 152: LED "Status/Error" - POWERLINK - Error
Technical data
L1
L2
L3
t
t
t
175