Ethernet 1 Interface (Eth1); Ethernet 2 Interface (Eth2) - B&R Panel PC 2100 User Manual

Hide thumbs Also See for Panel PC 2100:
Table of Contents

Advertisement

2.2.4.3 Ethernet 1 interface (ETH1)

This Ethernet controller is connected to external devices via the system unit.
Controller
Wiring
Transfer rate
Cable length
LED "Speed"
Yellow
Green
LED "Link"
Green
Link (indicates connection
to an Ethernet network)
1)
The interfaces, etc. available on the device or module have been numbered as such for the purpose of clear differentiation. This numbering may deviate
from the numbering used by the respective operating system, however.
2)
Switching takes place automatically.
3)
The 10 Mbit/s transfer rate / connection only exists if LED "Link" is also lit at the same time.
Driver support
A special driver is required to operate the Ethernet controller. Drivers for approved operating systems are available
for download in the Downloads section of the B&R website (www.br-automation.com).
Information:
Only download necessary drivers from the B&R website, not from vendor websites.

2.2.4.4 Ethernet 2 interface (ETH2)

This Ethernet controller is connected to external devices via the system unit.
Controller
Wiring
Transfer rate
Cable length
LED "Speed"
Yellow
Green
LED "Link"
Green
Link (indicates connection
to an Ethernet network)
1)
The interfaces, etc. available on the device or module have been numbered as such for the purpose of clear differentiation. This numbering may deviate
from the numbering used by the respective operating system, however.
2)
Switching takes place automatically.
3)
The 10 Mbit/s transfer rate / connection only exists if LED "Link" is also lit at the same time.
Driver support
A special driver is required to operate the Ethernet controller. Drivers for approved operating systems are available
for download in the Downloads section of the B&R website (www.br-automation.com).
Information:
Only download necessary drivers from the B&R website, not from vendor websites.
Panel PC 2100 user's manual V1.17
Ethernet 1 interface (ETH1
Intel I210
S/STP (Cat 5e)
10/100/1000 Mbit/s
2)
Max. 100 m (min. Cat 5e)
On
Off
100 Mbit/s
10 Mbit/s
1000 Mbit/s
On
Off
Activity (blinks to indi-
cate active data transfer)
Table 38: Ethernet interface (ETH1)
Ethernet 2 interface (ETH2
Intel I210
S/STP (Cat 5e)
10/100/1000 Mbit/s
2)
Max. 100 m (min. Cat 5e)
On
Off
100 Mbit/s
10 Mbit/s
1000 Mbit/s
On
Off
Activity (blinks to indi-
cate active data transfer)
Table 39: Ethernet interface (ETH2)
)
1)
3)
-
LED "Link"
)
1)
3)
-
LED "Link"
Technical data
RJ45, female
1
LED "Speed"
RJ45, female
1
LED "Speed"
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mappc2100-eng

Table of Contents