Key And Led Configuration - B&R Panel PC 2100 User Manual

Technical data

2.2.5.2 Key and LED configuration

Each key and LED can be individually configured and adapted to the application. Several B&R tools are available
for this:
• B&R Key Editor for Windows operating systems
• B&R KCF Editor for Windows operating systems
• Visual Components for Automation Runtime
Keys and LEDs from each device are processed by the matrix controller in a bit string of 128 bits each.
The positions of keys and LEDs in the matrix are represented as hardware numbers. The hardware numbers can
be read directly on the target system using the B&R Key Editor or B&R Control Center.
Figure 23: Hardware numbers in the B&R Key Editor and B&R Control Center
The following graphics show the positions of the keys and LEDs in the matrix. They are represented as follows.
Hardware number of key
5AP1151.0573-000
58
Hardware number of key
Key without LED
Figure 24: Representation of keys and LEDs
Figure 25: 5AP1151.0573-000 - Key and LED configuration
Hardware number of LED
Key with LED
Hardware number of LED
LED
Panel PC 2100 user's manual V1.17