• Setting the SDL equalizer value when adjusting SDL cables
• Changing the user serial ID
For a detailed description of the Control Center, see Automation Help or the user documentation (depends on
the version).
4.14.2 Installation
The B&R Automation Device Interface (ADI) driver (also includes the Control Center) and user documentation can
be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com).
Information:
The ADI driver is included in most B&R Windows operating systems; it can also be installed on demand.
If a more current ADI driver version exists (see the Downloads section of the B&R website), it can be
installed later. Note that the write filter must be disabled during installation.
Panel PC 2100 user's manual V1.17
Software
297