Adjusting The Display Brightness - B&R Panel PC 2100 User Manual

Commissioning

3.7 Adjusting the display brightness

1. Open the Control Center in the Control Panel.
2. Select tab "Display".
3. Select a panel from the list. Only the local display (PP Link) and connected panels are displayed in the list.
4. Set the desired brightness using the slider.
Information:
The changed settings are displayed online but only applied by the system (and used after the next
restart) if the Control Center is exited with OK.
The configured brightness is independent of the value configured in BIOS Setup, i.e. the value set
in BIOS is used until Windows boots. The value set in BIOS is only applied the first time the Control
Center is launched.
232
Figure 131: Adjusting the display brightness
Panel PC 2100 user's manual V1.17