Table of Contents
Advertisement
2.2.3 Vibration
The following table provides an overview of the maximum vibration specifications of the complete system. The use
of individual components may result in limitations.
Panel PC
With CFast card
1)
Testing is performed in accordance with EN 60068-2-6.
2)
This value applies to a device in its original packaging.
2.2.4 Shock
The following table provides an overview of the maximum shock specifications of the complete system. The use
of individual components may result in limitations.
Panel PC
With CFast card
1)
Testing is performed in accordance with EN 60068-2-27.
2)
This value applies to a device in its original packaging.
2.2.5 Protection
The Panel PC 2100 is rated IP65 on the front and IP20 on the back in accordance with EN 60529 under the
following conditions:
• The Panel PC 2100 is installed correctly (see "Installation" on page 164).
• All covers and components are installed on the interfaces and slots.
• All environmental conditions are being observed.
The Panel PC 2100 with AP9x3 and AP1000 display units also has "Type 4X indoor use only" in accordance with
UL50 on the front under the same conditions.
Panel PC 2100 user's manual V1.11
Operation
1)
Continuous
Periodic
2 to 9 Hz:
2 to 9 Hz:
1.75 mm amplitude
3.5 mm amplitude
9 to 200 Hz: 0.5 g
9 to 200 Hz: 1 g
Table 28: Vibration
Operation
1)
15 g, 11 ms
Table 29: Shock
Technical data • Complete system
Storage
1)2)
2 to 8 Hz: 7.5 mm amplitude
2 to 8 Hz: 7.5 mm amplitude
8 to 200 Hz: 2 g
200 to 500 Hz: 4 g
Storage
1)2)
30 g, 6 ms
Transport
1)2)
8 to 200 Hz: 2 g
200 to 500 Hz: 4 g
Transport
1)2)
30 g, 6 ms
35
Advertisement
Table of Contents
