Rcm; Dnv Gl Certification - B&R Panel PC 2100 User Manual

5.2.4 KC

5.2.5 RCM

5.2.6 DNV GL certification

The following table lists the revisions from which DNV GL certification applies to individual components.
Model number Description
5AP923.1505-00 Automation Panel 15.0" XGA TFT - 1024 x 768 pixels (4:3) - Single-touch (analog resistive) - Control cabinet installation
- Landscape format - For PPC900 / PPC2100 / Link module
5AP933.240C-00 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet
installation - Landscape format - For PPC900 / PPC2100 / PPC3100 / link modules
5AP1120.1906-000 Automation Panel 19.0" SXGA TFT - 1280 x 1024 pixels (5:4) - Single-touch (analog resistive) - Control cabinet installation
- Landscape format - Front USB interface - For PPC900 / PPC2100 / link modules - Compatible with 5AP920.1906-01/
5PC720.1906-00/5PC820.1906-00
5AP1130.156C-000 Automation Panel 15.6" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - Control cabinet
installation - Landscape format - For PPC900 / PPC2100 / PPC3100 / link modules
5PPC2100.BY44-000 Panel PC 2100 - Intel Atom E3845 1.91 GHz - Quad core - 4 GB SDRAM - For Automation Panel 923/933
5PPC2100.BY48-000 PPC2100 system unit - Intel Atom E3845 1.91 GHz - Quad core - 8 GB SDRAM - For Automation Panel 923/933/1000
5CFAST.2048-00 CFast card, 2 GB SLC
Panel PC 2100 user's manual V1.17
Products with this mark are tested by an accredited testing laboratory and permitted
for import to the Korean market (based on EU compliance).
Products with this mark are tested by an accredited testing laboratory and certified by
the ACMA. This mark is valid in Australia/Oceania and simplifies the certification of
your machines and systems in this economic region (based on EU compliance).
Products with this certification have been certified by classification society DNV GL
and are suitable for maritime environments. DNV GL certificates (type approval) are
generally accepted by other classification societies during ship acceptance proce-
dures.
DNV GL per standard DNVGL-CG-0339 from November 2016
IACS E10
EN 60945 section 1c
These products are suitable for the following DNV GL environmental
conditions (DNV GL classes):
Temperature B
Moisture B
Vibration A
EMC B
Housing When installing on board, the guidelines for meeting the re-
quired protection level must be observed.
Products used on a ship's bridge must be dimmable using software in accordance
with the regulations and guidelines from the respective classification society.
Windows 7 operating systems are only permitted to be used as embedded variants.
For all other B&R-approved operating systems there are no restrictions.
Standards and certifications
DNV GL
beginning
with rev.
D0
F0
D0
C0
E0
C5
D0
305