B&R Panel PC 2100 User Manual page 93

Product ID
Revision
General information
Degree of protection per EN 60529
Protection per UL 50
Mechanical properties
Front
4)
Frame
Keypad overlay
Material
Light background
Dark gray border around display
Gasket
Dimensions
Width
Height
Weight
1) Yes, although applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) At an ambient temperature of 25°C. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
3) Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com).
4) There may be visible deviations in the color and surface appearance depending on the process or batch.
2.3.2.1.4 Dimensions
2.3.2.1.5 Requirements
5.7" AP1000 panels are supported starting with the following firmware versions:
• Firmware V3.11 or later for SDL/DVI receiver 5DLSDL.1001-00
• Firmware V4.08 or later for SDL3 receiver 5DLSD3.1001-00
• V1.03 for the 5PPC2100.BYxx-000 PPC2100 system unit
Panel PC 2100 user's manual V1.17
Table 65: 5AP1120.0573-000, 5AP1120.0573-000 - Technical data
Figure 63: 5AP1120.0573-000 - Dimensions
5AP1120.0573-000
D0
Front: IP65
Back: IP20 (only with installed link module or installed system unit)
Front: Type 4X indoor use only
Aluminum, naturally anodized
Polyester
RAL 9006
RAL 7024
3 mm built-in gasket
212 mm
156 mm
1100 g
212
Technical data
E0
93