Installation Information For Individual Components - B&R Panel PC 2100 User Manual

Commissioning

3.1.5 Installation information for individual components

Information:
If the Panel PC 2100 is not delivered as a complete system but as individual components (or individual
components are installed afterward), then these components must be enabled in BIOS. This is done
by launching BIOS when booting the system, loading the default BIOS values and then saving the set-
tings. For additional information, see
components:
• System unit
• Interface option
218
"Exit" on page 268. This is required for the following individual
Panel PC 2100 user's manual V1.17