B&R Panel PC 2100 User Manual page 28

Technical data
AP1000 panels with clamping blocks - Installation diagrams
Figure 7: Panel PC 2100 with AP1000 panels with clamping blocks (example figure) - Installation diagram
All dimensions are specified in mm.
The cutout tolerances are +0 mm / -0.5 mm.
Display type Model number
10.4" single-touch with keys 5AP1181.1043-000
10.4" single-touch with keys 5AP1182.1043-000
12.1" single-touch 5AP1120.1214-000
15.0" single-touch 5AP1120.1505-000
15.0" single-touch with keys 5AP1180.1505-000
15.0" single-touch with keys 5AP1181.1505-000
19.0" single-touch 5AP1120.1906-000
Dimension "Z" describes the thickness of the wall or control cabinet panel.
A 3 mm hex screwdriver is needed to tighten and remove the screw on the clamping blocks. The maximum tight-
ening torque of the clamping blocks is 0.5 Nm.
28
X
X
303
403
342
415
415
415
510
Table 14: AP1000 panels with clamping blocks - Installation diagrams
Y Z min. Z max. Number of clamping blocks
341 2 10 10
271 2 10 8
267 2 10 8
313 2 10 8
313 2 10 8
413 2 10 10
404 2 10 12
Z
Panel PC 2100 user's manual V1.17