2.2.6.2 Compatibility details
2.2.6.2.1 Example
The measurement values (all in mm) and information in the following figure also apply to the other figures below.
PP100/200/300/400
Specification of difference
2.2.6.2.2 5.7" devices
The cutout tolerance for PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 systems is ±0.5 mm.
The cutout tolerance for the AP1000 is +0 mm / -0.5 mm.
PP100/200/300/400
PP500
5.7" Automation Panel 1000, Power Panel 500 devices and Power Panel 100/200/300/400 devices are 100%
mounting compatible in the Horizontal1 format.
Panel PC 2100 user's manual V1.17
Spacing (left)
To the edge of the device
10
Outer contour of device
Cutout for PP100/200/300/400 device
Cutout for AP900/PPC700/PP500 device
Figure 31: Compatibility details - Image structure
6.5
Outer contour of device
Cutout for device
Figure 32: Mounting compatibility - 5.7" device - Horizontal1
Outer dimensions
423 x 288
Installation dimensions
e.g. depending on the device type
402 x 266.5
403 x 271
Spacing (bottom, to edge of device)
e.g. depending on the device type
212 x 156
199 x 143
Technical data
Spacing (right)
To the edge of the device
10
8.5
Spacing (top)
To the edge of the device
AP900/PPC700
PP500
13 PP100/200/300/400
8.5 AP900, PPC700, PP500
6.5
6.5
AP1000
6.5
65