Yes, although applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2)
At an ambient temperature of 25°C. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
3)
There may be visible deviations in the color and surface appearance depending on the process or batch.
2.3.2.2.4 Dimensions
2.3.2.2.5 Requirements
5.7" AP1000 panels are supported starting with the following firmware versions:
• Firmware V3.11 or later for SDL/DVI receiver 5DLSDL.1001-00
• Firmware V4.08 or later for SDL3 receiver 5DLSD3.1001-00
• V1.03 for the 5PPC2100.BYxx-000 PPC2100 system unit
96
Table 67: 5AP1151.0573-000, 5AP1151.0573-000 - Technical data
Figure 65: 5AP1151.0573-000 - Dimensions
5AP1151.0573-000
D0
Pollution degree 2
Front: IP65
Back: IP20 (only with installed link module or installed system unit)