Usb Interface - B&R Panel PC 2100 User Manual

Technical data

2.2.5.3 USB interface

AP1000 panels with 10.4", 12.1" (4:3 format only), 15" and 19" display diagonals are equipped with a USB 2.0
interface on the front. This is equipped with a USB interface cover. IP65 protection (front) is only provided if the
USB interface cover is installed correctly.
Warning!
Peripheral USB devices can be connected to the USB interfaces. Due to the large number of USB
devices available on the market, B&R cannot guarantee their functionality. Functionality is ensured
when using the USB devices available from B&R.
Caution!
Because this interface is designed according to general PC specifications, extreme care should be
taken with regard to EMC, wiring, etc.
Front USB
The front USB interface is available to the user for service purposes.
Type
Design
Transfer rate
Current-carrying capacity
2)
Front USB
Cable length
USB 2.0
1) The interfaces, etc. available on the device or module have been numbered as such for the purpose of clear differentiation. This numbering may deviate
from the numbering used by the respective operating system, however.
2) The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 500 mA).
62
Universal Serial Bus (front USB)
USB 2.0
Type A
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s), high speed (480 Mbit/s)
Max. 500 mA
Max. 5 m (without hub)
Table 47: Front USB interface
1)
1x USB type A, female
Front USB interface
Panel PC 2100 user's manual V1.17