Page 1 Automation Panel 1000 User's manual Version: 2.00 (July 2019) Model no.: MAAP1000-ENG Translation of the original documentation All values in this manual are current as of its creation. We reserve the right to change the contents of this manual without notice. B&R Industrial Automation GmbH is not liable for technical or editorial errors and defects in this manual.
Page 2: Table Of Contents
4.1.5 Device interfaces............................. 39 4.1.5.1 SDL/DVI receiver (5DLSDL.1001-00)....................39 4.1.5.2 SDL3 receiver (5DLSD3.1001-00)..................... 45 4.1.5.3 SDL4 receiver (5DLSD4.1001-00)..................... 49 4.1.6 Features of AP1000 panels........................53 4.1.6.1 Slide-in labels.............................53 4.1.6.2 Key and LED configuration........................54 4.1.6.3 USB interface............................. 57 Automation Panel 1000 user's manual V2.00...
Page 3 6.3.1.7 Windows Embedded Standard 2009....................126 6.3.2 Multi-touch (projected capacitive - PCT)....................127 6.3.2.1 Windows 10 IoT Enterprise 2016 LTSB..................127 6.3.2.2 Windows 10 IoT Enterprise 2015 LTSB..................127 6.3.2.3 Windows Embedded 8.1 Industry Pro..................... 127 Automation Panel 1000 user's manual V2.00...
Page 4 9.3.1.1 General information..........................142 9.3.1.2 Order data............................142 9.3.1.3 Technical data..........................142 9.3.1.4 Temperature/Humidity diagram......................143 9.3.2 5MMUSB.032G-02..........................144 9.3.2.1 General information..........................144 9.3.2.2 Order data............................144 9.3.2.3 Technical data..........................144 9.3.2.4 Temperature/Humidity diagram......................145 9.4 Cables................................. 146 9.4.1 DVI cables............................. 146 Automation Panel 1000 user's manual V2.00...
Page 5 10.2.6.1 General safety guidelines......................179 10.2.6.2 Assembly and installation......................179 10.2.6.3 Operation............................180 10.2.6.4 Servicing, disturbances and disassembly..................180 10.2.6.5 USB connection with the Automation Panel 1000.................181 10.2.6.6 USB connection with the SDL or SDL3 link module..............183 Automation Panel 1000 user's manual V2.00...
Page 6 A.5.2 Compatibility details..........................195 A.5.2.1 Example............................195 A.5.2.2 5.7" devices............................. 195 A.5.2.3 10.4" devices........................... 197 A.5.2.4 12.1" devices........................... 199 A.5.2.5 15" devices............................200 A.5.2.6 17" devices............................200 A.5.2.7 19" devices............................201 A.5.2.8 21.3" devices........................... 202 Automation Panel 1000 user's manual V2.00...
Page 7: Introduction
130 "B&R Key Editor" on page 135. • Documented the following panel: ° "5AP1130.156C-000" on page 102 ° "5AP1130.185C-000" on page 104 • Updated data in sections "Mechanical properties", "Environmental properties" "Electrical properties". Automation Panel 1000 user's manual V2.00...
Page 8 Clamping blocks "5AC900.BLOC-01" on page 172 ° USB interface cover "5AC900.1201-00" on page 173 ° USB interface cover "5AC900.1201-01" on page 174 ° Line filter "5AC804.MFLT-00" on page 169 1.00 December 2015 First version Automation Panel 1000 user's manual V2.00...
Page 9: Information About This Document
±0.1 mm Over 6 to 30 mm ±0.2 mm Over 30 to 120 mm ±0.3 mm Over 120 to 400 mm ±0.5 mm Over 400 to 1000 mm ±0.8 mm Table 2: Nominal dimension ranges Automation Panel 1000 user's manual V2.00...
Page 10: General Safety Guidelines
Electronic devices are generally not failsafe. If the programmable logic controller, operating or control device or uninterruptible power supply fails, the user is responsible for ensuring that connected devices (such as motors) are brought to a safe state. Automation Panel 1000 user's manual V2.00...
Page 11: Transport And Storage
Automation Panels or Power Panels are protected on the front against the ingress of dust and moisture when installed correctly (e.g. cutout installation). The back of all devices must be protected against the ingress of dust and moisture, however, or the dust deposits must be removed at suitable intervals. Automation Panel 1000 user's manual V2.00...
Page 12: Programs, Viruses And Malicious Programs
• Notable system modifications such as configuration changes • Import of updates or patches for third-party software (non-B&R software) • Hardware replacement These tests should ensure that implemented security measures remain effective and that systems behave as expected. Automation Panel 1000 user's manual V2.00...
Page 13: System Overview
3.2.1 AP1000 panels AP1000 panels form the basis for the Automation Panel 1000, Panel PC 900, Panel PC 2100, Panel PC 2200 and Panel PC 3100 system families. Different display diagonals and touch screen technologies as well as panels with touch screen and keys are available.
Page 14: Design/Configuration
System overview 3.3 Design/Configuration Automation Panel 1000, Panel PC 900, Panel PC 2100, Panel PC 2200 and Panel PC 3100 systems can be assembled to meet individual requirements and operating conditions. Automation Panel 1000, Panel PC 900, Panel PC 2100, Panel PC 2200 and Panel PC 3100 systems are flexible so that an Automation Panel can be converted to a Panel PC or vice versa.
Page 15: Overview
HMI Service Center USB flash drive - Hardware diagnostic software - For APC810/PPC800 - For APC910/ PPC900 - For APC2100/PPC2100 - For APC2200/PPC2200 - For APC3100/PPC3100 - For APC51x/PP500 - For Automation Panel 800/900 - For Automation Panel 1000/5000 DVI cable 5CADVI.0018-00...
Page 16 USB 2.0 flash drive 4096 MB B&R USB cable 5CAUSB.0018-00 USB 2.0 connection cable - Type A - type B connector - 1.8 m 5CAUSB.0050-00 USB 2.0 connection cable - Type A - type B connector - 5 m Automation Panel 1000 user's manual V2.00...
Page 17: Technical Data
✓ ✓ USB1, USB2 USB 1.1 COM interface for touch Grounding screen Maximum cable length: 40 m Requirements • Automation Panel with SDL/DVI receiver • B&R industrial PC with SDL interface • SDL cable Automation Panel 1000 user's manual V2.00...
Page 18 USB 2.0 COM interface for touch Grounding screen Maximum cable length: 5 m Requirements • Automation Panel with SDL/DVI receiver • B&R industrial PC with SDL interface • SDL cable, USB type A/B cable Automation Panel 1000 user's manual V2.00...
Page 19: Dvi Operation
USB 2.0 COM interface for touch Grounding ✓ screen Maximum cable length: 5 m Requirements • Automation Panel with SDL/DVI receiver • B&R industrial PC with DVI interface • DVI cable, USB type A/B cable Automation Panel 1000 user's manual V2.00...
Page 20 • Data from operating elements is not transferred. • Service and diagnostic data is not transferred. • The maximum cable length is limited to 5 m. • Upgrading the firmware of Automation Panels is not possible. Automation Panel 1000 user's manual V2.00...
Page 21: Sdl3 Operation
° No SDL3/SDL4 cable is connected. ° There is no connection established yet between the SDL3 link module and SDL3 transmitter. This behavior can be avoided by appropriate configuration in BIOS or via the graphics driver. Automation Panel 1000 user's manual V2.00...
Page 22: Sdl4 Operation
° No SDL3/SDL4 cable is connected. ° There is no connection established yet between the SDL4 link module and SDL4 transmitter. This behavior can be avoided by appropriate configuration in BIOS or via the graphics driver. Automation Panel 1000 user's manual V2.00...
Page 23: Electrical Properties
The following block diagram shows the simplified structure of the 55DLSD4.1001-00 SDL4 receiver link module. Power Panel DDC SDL FPGA Serial front IF LVDS Buffering LVDS SDL4 decoder converter USB hub Power Type A Type A LED "Link" LED "Status" Automation Panel 1000 user's manual V2.00...
Page 24: Power Calculation
19.0" single-touch 5AP1120.1906-000 5.0 W 22.0 W 27.0 W Example 15" panel 5AP1120.1505-000 2.1 W + 8.9 W 11.0 W 5DLSDL.1001-00 SDL/DVI receiver 8.6 W (with USB consumers) 8.6 W Total max.: 19.6 W Automation Panel 1000 user's manual V2.00...
Page 25: Mechanical Properties
2D and 3D diagrams (DXF and STEP formats) can be downloaded from the B&R website (www.br-automation.com). AP1000 panels with retaining clips - Dimensions Figure 1: Automation Panel 1000 with retaining clips - Dimensions Panels Type Model number 5.7" single-touch 5AP1120.0573-000...
Page 26 Technical data AP1000 panels with clamping blocks - Dimensions Figure 2: Automation Panel 1000 with clamping blocks - Dimensions Panels Type Model number 10.4" single-touch with keys 5AP1181.1043-000 70.5 21.3 17.5 10.4" single-touch with keys 5AP1182.1043-000 355.5 70.5 21.3 17.5 12.1"...
Page 27: Installation Diagrams
Technical data 4.1.3.2 Installation diagrams Information: When installing the Automation Panel 1000, spacing for air circulation and additional free space for operating and servicing the device must be taken into account. AP1000 panels with retaining clips - Installation diagrams Figure 3: Automation Panel 1000 with retaining clips - Installation diagram The cutout tolerances are +0 mm / -0.5 mm.
Page 28 Technical data AP1000 panels with clamping blocks - Installation diagrams Figure 4: Automation Panel 1000 with clamping blocks - Installation diagram The cutout tolerances are +0 mm / -0.5 mm. Panels Type Model number Z min. Z max. Number of clamping blocks 10.4"...
Page 29: Spacing For Air Circulation
Rear view Side view Figure 5: Automation Panel 1000 - Spacing for air circulation S1: ≥10 mm S2: ≥ 50 mm S3: ≥80 mm S4: ≥...
Page 30: Mounting Orientations
Technical data 4.1.3.4 Mounting orientations The following diagram shows the approved mounting orientations for Automation Panel 1000 devices. An AP1000 is only permitted to be installed as shown or described below. 0° 0° Figure 6: Automation Panel 1000 - Mounting orientation This applies to the following tables: •...
Page 31 Technical data Mounting orientations for the Automation Panel 1000 with SDL3 receiver Mounting orientation All temperature specifications in degrees 0° Celsius (°C) at 500 meters above sea level. 0° -1° to -90° +1° to +90° ±180° -1° to -45° +1° to +90°...
Page 32: Weight
5AP1181.1505-000 6000 15.6" single-touch 5AP1120.156B-000 4200 15.6" multi-touch 5AP1130.156C-000 3700 18.5" multi-touch 5AP1130.185C-000 4600 19.0" single-touch 5AP1120.1906-000 7300 Link modules Type Model number Weight [g] SDL/DVI receiver 5DLSDL.1001-00 SDL3 receiver 5DLSD3.1001-00 SDL4 receiver 5DLSD4.1001-00 Automation Panel 1000 user's manual V2.00...
Page 33: Environmental Properties
✓ ✓ 5AP1181.1505-000 ✓ ✓ ✓ ✓ 5AP1120.156B-000 5AP1130.156C-000 5AP1130.185C-000 5AP1120.1906-000 ✓ ✓ ✓ The maximum ambient temperature for SDL3 link module 5DLSD3.1001-00 < Rev. A5 with the corresponding panel is reduced by 5°C. Automation Panel 1000 user's manual V2.00...
Page 34 ✓ 5AP1120.121E-000 5AP1130.121E-000 ✓ ✓ ✓ 5AP1120.1505-000 ✓ ✓ ✓ ✓ ✓ ✓ 5AP1180.1505-000 ✓ ✓ ✓ 5AP1181.1505-000 ✓ ✓ ✓ 5AP1120.156B-000 5AP1130.156C-000 ✓ ✓ ✓ 5AP1130.185C-000 ✓ ✓ ✓ 5AP1120.1906-000 ✓ ✓ ✓ Automation Panel 1000 user's manual V2.00...
Page 35 Type Model number Storage [°C] Transport [°C] SDL/DVI receiver 5DLSDL.1001-00 -20 to 60 -20 to 60 SDL3 receiver 5DLSD3.1001-00 -20 to 60 -20 to 60 SDL4 receiver 5DLSD4.1001-00 -20 to 60 -20 to 60 Automation Panel 1000 user's manual V2.00...
Page 36 For applications that do not run in approved operating systems, temperatures can be evaluated using the B&R MTCX Development Kit. The B&R MTCX Development Kit also contains executable EFI sample programs. 4.1.4.1.6 Temperature sensor positions Figure 7: Automation Panel 1000 - Temperature sensor position ADI sensors Position Measuring point Measurement Max.
Page 37: Relative Humidity
15 g, 11 ms 30 g, 6 ms 30 g, 6 ms Testing is performed per EN 60068-2-6. Testing is performed per EN 60068-2-27. The specification refers to a device in its original packaging. Automation Panel 1000 user's manual V2.00...
Page 38: Degree Of Protection
• Installation of all covers or components on interfaces and slots • All ambient conditions are observed. The Automation Panel 1000 also has "Type 4X indoor use only" under the same conditions per UL 50. Automation Panel 1000 user's manual V2.00...
Page 39: Device Interfaces
Reverse polarity protection • 3-pin • Male Electrical properties Nominal voltage 24 VDC ±25%, SELV Nominal current Max. 3 A Overvoltage category per EN 61131-2 Galvanic isolation Uninterruptible power supply EN 60950 requirements must be observed. Automation Panel 1000 user's manual V2.00...
Page 40 For example, a copper strip must be attached to the ground connection at a central grounding point of the control cabinet or system in which the device is installed. The wire cross section should be as large as possible (at least 2.5 mm²). Automation Panel 1000 user's manual V2.00...
Page 41 In SDL operation without USB type A/B cable, the USB transfer rate is limited to USB 1.1. A USB transfer rate of USB 2.0 is possible in DVI or SDL operation with a USB type A/B cable. Automation Panel 1000 user's manual V2.00...
Page 42 1920 x 1080 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0018-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 5CADVI.0050-00 The maximum cable length for DVI transfer is limited to 5 m due to the USB specification. Automation Panel 1000 user's manual V2.00...
Page 43 The USB interfaces are protected by a shared maintenance-free "USB current-limiting switch" (total max. 1 A). Front USB Automation Panel 1000 devices with 10.4", 12.1" (4:3 format only), 15" (4:3 format only) and 19" diagonals are equipped with a front USB 2.0 interface. For more information, see section "USB interface"...
Page 44 The brightness controls can be used to set the brightness of the backlight on the Automation Panel in DVI operation. Buttons have no function during SDL operation; the brightness can be set via the B&R Control Center, for example. Automation Panel 1000 user's manual V2.00...
Page 45: Sdl3 Receiver (5Dlsd3.1001-00)
Reverse polarity protection • 3-pin • Male Electrical properties Nominal voltage 24 VDC ±25%, SELV Nominal current Max. 3 A Overvoltage category per EN 61131-2 Galvanic isolation Uninterruptible power supply EN 60950 requirements must be observed. Automation Panel 1000 user's manual V2.00...
Page 46 For example, a copper strip must be attached to the ground connection at a central grounding point of the control cabinet or system in which the device is installed. The wire cross section should be as large as possible (at least 2.5 mm²). Automation Panel 1000 user's manual V2.00...
Page 47 B&R cannot guarantee their functionality. The functionality of USB devices available from B&R is guaranteed. Caution! Due to the general PC specification, this interface must be handled with the utmost care with regard to EMC, cable routing, etc. Automation Panel 1000 user's manual V2.00...
Page 48 The USB interfaces are protected by a shared maintenance-free "USB current-limiting switch" (total max. 1 A). Front USB Automation Panel 1000 devices with 10.4", 12.1" (4:3 format only), 15" (4:3 format only) and 19" diagonals are equipped with a front USB 2.0 interface. For information about this, see section "USB interfaces" on the respective link module in chapter "Device interfaces"...
Page 49: Sdl4 Receiver (5Dlsd4.1001-00)
Reverse polarity protection • 3-pin • Male Electrical properties Nominal voltage 24 VDC ±25%, SELV Nominal current Max. 3 A Overvoltage category per EN 61131-2 Galvanic isolation Uninterruptible power supply EN 60950 requirements must be observed. Automation Panel 1000 user's manual V2.00...
Page 50 For example, a copper strip must be attached to the ground connection at a central grounding point of the control cabinet or system in which the device is installed. The wire cross section should be as large as possible (at least 2.5 mm²). Automation Panel 1000 user's manual V2.00...
Page 51 B&R cannot guarantee their functionality. The functionality of USB devices available from B&R is guaranteed. Caution! Due to the general PC specification, this interface must be handled with the utmost care with regard to EMC, cable routing, etc. Automation Panel 1000 user's manual V2.00...
Page 52 The USB interfaces are protected by a shared maintenance-free "USB current-limiting switch" (total max. 1 A). Front USB Automation Panel 1000 devices with 10.4", 12.1" (4:3 format only), 15" (4:3 format only) and 19" diagonals are equipped with a front USB 2.0 interface. For information about this, see section "USB interfaces" on the respective link module in chapter "Device interfaces"...
Page 53: Features Of Ap1000 Panels
It is also possible to download a print template for slide-in labels with individual inscriptions from the B&R website (www.br-automation.com). The slots provided for slide-in labels are accessible on the rear of the Automation Panel devices. Automation Panel 1000 user's manual V2.00...
Page 54: Key And Led Configuration
• Hardware numbers of keys are specified in the following with black numbers. • Hardware numbers of LEDs are specified in the following with blue numbers. • Presentation examples: Key with LED 5AP1151.0573-000 Figure 12: 5AP1151.0573-000 - Key and LED configuration Automation Panel 1000 user's manual V2.00...
Page 55 Technical data 5AP1180.1043-000 Figure 13: 5AP1180.1043-000 - Key and LED configuration 5AP1181.1043-000 Figure 14: 5AP1181.1043-000 - Key and LED configuration 5AP1182.1043-000 Figure 15: 5AP1182.1043-000 - Key and LED configuration Automation Panel 1000 user's manual V2.00...
Page 56 Technical data 5AP1180.1505-000 Figure 16: 5AP1180.1505-000 - Key and LED configuration 5AP1181.1505-000 Figure 17: 5AP1181.1505-000 - Key and LED configuration Automation Panel 1000 user's manual V2.00...
Page 57: Usb Interface
In SDL3 operation: Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (30 Mbit/s) In SDL4 operation: Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (150 Mbit/s) The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 500 mA). Automation Panel 1000 user's manual V2.00...
Page 58: Individual Components
Typ. 20 to 400 cd/m² Typ. 22.5 to 450 cd/m² Half-brightness time 50,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 4: 5AP1120.0573-000, 5AP1120.0573-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 59 -50 -40 -30 -20 -10 Figure 19: 5AP1120.0573-000 ≥ Rev. E0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 60 -50 -40 -30 -20 -10 Figure 20: 5AP1120.0573-000 ≤ Rev. D0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C RH [%] Relative humidity (RH) in percent and non-condensing Storage and transport Automation Panel 1000 user's manual V2.00...
Page 61: 5Ap1151.0573-000
22 with LED (yellow) System keys Numeric keys, cursor block Service life >1,000,000 actuations at 1 ±0.3 N to 3 ±0.3 N actuating force LED intensity Yellow Typ. 38 mcd Table 6: 5AP1151.0573-000, 5AP1151.0573-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 62 • Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00 • Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00 4.2.1.2.6 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 22: 5AP1151.0573-000 ≥ Rev. E0 - Temperature/Humidity diagram Automation Panel 1000 user's manual V2.00...
Page 63 -50 -40 -30 -20 -10 Figure 23: 5AP1151.0573-000 ≤ Rev. D0 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 64: 5Ap1120.0702-000
Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Table 8: 5AP1120.0702-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 65 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 25: 5AP1120.0702-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 66: 5Ap1130.0702-000
Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Table 10: 5AP1130.0702-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 67 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 27: 5AP1130.0702-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 68: 5Ap1120.101E-000
Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Table 12: 5AP1120.101E-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 69 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 29: 5AP1120.101E-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 70: 5Ap1130.101E-000
Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Table 14: 5AP1130.101E-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 71 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 31: 5AP1130.101E-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 72: 5Ap1120.1043-000
Direction U = 80° / Direction D = 80° Backlight Type Brightness (dimmable) Typ. 22.5 to 450 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 16: 5AP1120.1043-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 73 Figure 32: 5AP1120.1043-000 - Dimensions 4.2.1.7.5 Requirements 10.4" AP1000 panels are supported starting with the following firmware versions: • Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00 • Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00 Automation Panel 1000 user's manual V2.00...
Page 74 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 33: 5AP1120.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 75: 5Ap1180.1043-000
Direction U = 80° / Direction D = 80° Backlight Type Brightness (dimmable) Typ. 22.5 to 450 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 18: 5AP1180.1043-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 76 Figure 34: 5AP1180.1043-000 - Dimensions 4.2.1.8.5 Requirements 10.4" AP1000 panels are supported starting with the following firmware versions: • Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00 • Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00 Automation Panel 1000 user's manual V2.00...
Page 77 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 35: 5AP1180.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 78: 5Ap1181.1043-000
Direction R = 80° / Direction L = 80° Vertical Direction U = 80° / Direction D = 80° Backlight Type Brightness (dimmable) Typ. 22.5 to 450 cd/m² Half-brightness time 70,000 h Table 20: 5AP1181.1043-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 79 Figure 36: 5AP1181.1043-000 - Dimensions 4.2.1.9.5 Requirements 10.4" AP1000 panels are supported starting with the following firmware versions: • Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00 • Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00 Automation Panel 1000 user's manual V2.00...
Page 80 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 37: 5AP1181.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 81: 5Ap1182.1043-000
Direction U = 80° / Direction D = 80° Backlight Type Brightness (dimmable) Typ. 22.5 to 450 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 22: 5AP1182.1043-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 82 Figure 38: 5AP1182.1043-000 - Dimensions 4.2.1.10.5 Requirements 10.4" AP1000 panels are supported starting with the following firmware versions: • Firmware V03.11 or later with SDL/DVI receiver 5DLSDL.1001-00 • Firmware V04.08 or later with SDL3 receiver 5DLSD3.1001-00 Automation Panel 1000 user's manual V2.00...
Page 83 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 39: 5AP1182.1043-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 84: 5Ap1120.1214-000
Direction U = 89° / Direction D = 89° Backlight Type Brightness (dimmable) Typ. 22.5 to 450 cd/m² Half-brightness time 50,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 24: 5AP1120.1214-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 85 Visual deviations in color and surface quality are possible due to process or batch conditions. 4.2.1.11.4 Dimensions Figure 40: 5AP1120.1214-000 - Dimensions 4.2.1.11.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 41: 5AP1120.1214-000 - Temperature/Humidity diagram Automation Panel 1000 user's manual V2.00...
Page 86 Technical data Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 87: 5Ap1120.121E-000
Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Table 26: 5AP1120.121E-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 88 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 43: 5AP1120.121E-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 89: 5Ap1130.121E-000
Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Table 28: 5AP1130.121E-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 90 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 45: 5AP1130.121E-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 91: 5Ap1120.1505-000
Direction U = 70° / Direction D = 70° Backlight Type Brightness (dimmable) Typ. 20 to 400 cd/m² Half-brightness time 50,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 30: 5AP1120.1505-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 92 Visual deviations in color and surface quality are possible due to process or batch conditions. 4.2.1.14.4 Dimensions Figure 46: 5AP1120.1505-000 - Dimensions 4.2.1.14.5 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Figure 47: 5AP1120.1505-000 - Temperature/Humidity diagram Automation Panel 1000 user's manual V2.00...
Page 93 Technical data Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 94: 5Ap1180.1505-000
Direction U = 70° / Direction D = 70° Backlight Type Brightness (dimmable) Typ. 20 to 400 cd/m² Half-brightness time 50,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 32: 5AP1180.1505-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 95 Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com). Visual deviations in color and surface quality are possible due to process or batch conditions. 4.2.1.15.4 Dimensions Figure 48: 5AP1180.1505-000 - Dimensions Automation Panel 1000 user's manual V2.00...
Page 96 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 49: 5AP1180.1505-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 97: 5Ap1181.1505-000
XGA, 1024 x 768 pixels Contrast 700:1 Viewing angles Horizontal Direction R = 80° / Direction L = 80° Vertical Direction U = 70° / Direction D = 70° Table 34: 5AP1181.1505-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 98 Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com). Visual deviations in color and surface quality are possible due to process or batch conditions. Automation Panel 1000 user's manual V2.00...
Page 99 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 51: 5AP1181.1505-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 100: 5Ap1120.156B-000
Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Degree of protection per UL 50 Front: Type 4X indoor use only Table 36: 5AP1120.156B-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 101 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 53: 5AP1120.156B-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 102: 5Ap1130.156C-000
Type Brightness (dimmable) Typ. 40 to 400 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Projected capacitive touch (PCT) Controller Transmittance See appendix A, section "Touch screen". Table 38: 5AP1130.156C-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 103 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 55: 5AP1130.156C-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C RH [%] Relative humidity (RH) in percent and non-condensing Storage and transport Automation Panel 1000 user's manual V2.00...
Page 104: 5Ap1130.185C-000
Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Degree of protection per EN 60529 Front: IP65 Back: IP20 (only with installed link module or installed system unit) Table 40: 5AP1130.185C-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 105 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 57: 5AP1130.185C-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 106: 5Ap1120.1906-000
Direction U = 85° / Direction D = 85° Backlight Type Brightness (dimmable) Typ. 35 to 350 cd/m² Half-brightness time 70,000 h Touch screen Type Technology Analog, resistive Controller B&R, serial, 12-bit Transmittance 81% ±3% Table 42: 5AP1120.1906-000 - Technical data Automation Panel 1000 user's manual V2.00...
Page 107 Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website (www.br-automation.com). Visual deviations in color and surface quality are possible due to process or batch conditions. 4.2.1.20.4 Dimensions Figure 58: 5AP1120.1906-000 - Dimensions Automation Panel 1000 user's manual V2.00...
Page 108 RH [%] T [°C] -50 -40 -30 -20 -10 Figure 59: 5AP1120.1906-000 - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 109: Link Modules
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s) Current-carrying capacity Total max. 1 A Panel In Variant DVI-D Type SDL/DVI Electrical properties Nominal voltage 24 VDC ±25%, SELV Table 44: 5DLSDL.1001-00 - Technical data Automation Panel 1000 user's manual V2.00...
Page 110 Max. USB 1.1 is possible in "SDL operation without USB cable". For the 2 USB type A female connectors. EN 60950 requirements must be observed; see section "+24 VDC power supply" of the user's manual. Automation Panel 1000 user's manual V2.00...
Page 111: 5Dlsd3.1001-00
Nominal voltage 24 VDC ±25%, SELV Nominal current Max. 3 A Overvoltage category per EN 61131-2 Galvanic isolation Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Table 46: 5DLSD3.1001-00 - Technical data Automation Panel 1000 user's manual V2.00...
Page 112 Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. EN 60950 requirements must be observed; see section "+24 VDC power supply" of the user's manual. Automation Panel 1000 user's manual V2.00...
Page 113: 5Dlsd4.1001-00
Nominal voltage 24 VDC ±25%, SELV Nominal current Max. 3 A Overvoltage category per EN 61131-2 Galvanic isolation Operating conditions Pollution degree per EN 61131-2 Pollution degree 2 Table 48: 5DLSD4.1001-00 - Technical data Automation Panel 1000 user's manual V2.00...
Page 114 Width 190 mm Height 110 mm Depth 23.6 mm Weight 525 g Table 48: 5DLSD4.1001-00 - Technical data EN 60950 requirements must be observed; see section "+24 VDC power supply" of the data sheet. Automation Panel 1000 user's manual V2.00...
Page 115: Installation And Wiring
• This device is only approved for use in closed rooms and not permitted to be exposed to direct sunlight. • The climatic and ambient conditions must be taken into account, see "Environmental properties" on page Automation Panel 1000 user's manual V2.00...
Page 116 Damaged packaging indicates that the device has been severely affected by environmental influences and may have been damaged. This can result in malfunctions of the device, machine or system. Automation Panel 1000 user's manual V2.00...
Page 117: Installing The Ap1000 With Retaining Clips
Installation and wiring 5.2 Installing the AP1000 with retaining clips The Automation Panel 1000 is installed in the installation cutout using retaining clips. The number of retaining clips depends on the panel. The following Automation Panel 1000 devices are installed using retaining clips: •...
Page 118 4. Secure the retaining clips to the wall or control cabinet plate (1) by alternately tightening the mounting screws with a 2.5 mm hex screwdriver. The tightening torque for optimal sealing should be max. 1 Nm. 1 - 6 mm Figure 62: Fastening the retaining clips Automation Panel 1000 user's manual V2.00...
Page 119: Installing The Ap1000 With Clamping Blocks
Installation and wiring 5.3 Installing the AP1000 with clamping blocks The Automation Panel 1000 is installed in the installation cutout using clamping blocks. The number of clamping blocks depends on the panel. The following Automation Panel 1000 systems are installed using clamping blocks: •...
Page 120: Switch The Link Module
6. The link module can now be removed by pulling it straight up. Figure 66: Removing the link module 7. The link module can now be reinstalled by following these steps in reverse order. The max. tightening torque of the Torx screws (T10) is 0.5 Nm. Automation Panel 1000 user's manual V2.00...
Page 121: Connecting To The Power Grid
Insert a screwdriver into the cage clamp terminals ➀ and secure the conductors with wire end sleeves in the terminal contacts ➁ as shown in the figure below. Close the terminal contact by removing the screwdriver. 24 VDC 0 VDC Automation Panel 1000 user's manual V2.00...
Page 122: Connecting The Power Supply To A B&R Device
1. Carry out electrostatic discharge on the housing or at the ground connection. 2. Connect the power supply connector to the B&R device and tighten the mounting screws (max. tightening torque 0.5 Nm). Figure 67: Connecting the power supply connector to a B&R device Automation Panel 1000 user's manual V2.00...
Page 123: Grounding Concept - Functional Ground
The functional ground on the B&R device is marked with the following symbol: Control cabinet Ground connection Power supply Grounding rail Min. 2.5 mm Min. 1.5 mm Figure 68: Automation Panel 1000 - Grounding concept Automation Panel 1000 user's manual V2.00...
Page 124: Connecting Cables
For this specification, Locating screws see the technical data of the respective cable. The maximum tightening torque of the locating screws Bend radius is 0.5 Nm. Locating screws Figure 69: Connecting cables - Bend radius Automation Panel 1000 user's manual V2.00...
Page 125: Commissioning
• An Automation PC or Panel PC is connected (via DVI, SDL, SDL3 or SDL4). 6.2.2 Switching on the Automation Panel Procedure 1. Connect the power supply and switch it on. 2. The device is operating. Automation Panel 1000 user's manual V2.00...
Page 126: Touch Screen Calibration
On all other devices, the touch screen driver must be subsequently installed to operate the touch screen. The appropriate driver is available for download in the Downloads section of the B&R website (www.br-automation.com). Automation Panel 1000 user's manual V2.00...
Page 127: Multi-Touch (Projected Capacitive - Pct)
SDL/DVI receiver. 6.4.1 Adjusting in SDL / SDL3 / SDL4 mode 1. Open Control Center in the Control Panel. 2. Select the Display tab. 3. Select the Automation Panel from the list. Automation Panel 1000 user's manual V2.00...
Page 128: Adjusting In Dvi Operation
BIOS is used until Windows boots. The value set in BIOS is only applied the first time the Control Center is launched. 6.4.2 Adjusting in DVI operation 1. Use the two brightness controls on the SDL/DVI receiver to set the brightness. Automation Panel 1000 user's manual V2.00...
Page 129: Software
• Windows Embedded Standard 7 Premium • B&R Linux 8 and 9 No guarantee can be given for multi-touch or single-touch operation, compatibility and functionality for operation with other operating systems and/or individual touch screen drivers. Automation Panel 1000 user's manual V2.00...
Page 130: Automation Runtime
For exact information regarding model numbers and Automation Runtime Windows (ARwin) support, see the user's manual for the B&R industrial PC being used. This is available in the Downloads section of the B&R website (www.br-automation.com). Automation Panel 1000 user's manual V2.00...
Page 131: Control Center
• Setting the SDL equalizer value for the SDL cable adjustment • Changing the user serial ID Depending on the version, a detailed description of the Control Center is available either in the integrated help documentation or in the user documentation. Automation Panel 1000 user's manual V2.00...
Page 132: Installation
The ADI driver is included in most B&R Windows operating systems or can be installed on request. If a more recent ADI driver version exists (see the Downloads section of the B&R website), it can be installed later. The write filter must be disabled during installation. Automation Panel 1000 user's manual V2.00...
Page 133: Development Kit
B&R images of embedded operating systems. For a detailed description of how to use ADI functions, see Automation Help. The B&R ADI Development Kit can be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com). Automation Panel 1000 user's manual V2.00...
Page 134: Net Sdk
B&R images of embedded operating systems. For a detailed description of how to use ADI functions, see Automation Help. The ADI .NET SDK can be downloaded at no cost from the Downloads section of the B&R website (www.br- automation.com). Automation Panel 1000 user's manual V2.00...
Page 135: B&R Key Editor
For detailed instructions about configuring keys and LEDs and installing the key configuration on the target system, see the help documentation for the B&R Key Editor. The B&R Key Editor and help documentation can be down- loaded at no cost from the Downloads section of the B&R website (www.br-automation.com). Automation Panel 1000 user's manual V2.00...
Page 136: B&R Kcf Editor
Additional features if the KCF Editor is executed on the target device • Panel and key detection • LED test • Download/Upload the configuration The ADI driver must be installed on the B&R PC for these features. Automation Panel 1000 user's manual V2.00...
Page 137: Hmi Service Center
- For APC810/PPC800 - For APC910/PPC900 - For APC2100/PPC2100 - For APC2200/PPC2200 - For APC3100/ PPC3100 - For APC51x/PP500 - For Automation Panel 800/900 - For Automation Panel 1000/5000 Table 49: 5SWUTI.0001-000 - Order data Automation Panel 1000 user's manual V2.00...
Page 138: Maintenance
Apply the cleaning agent to the cloth first; do not spray it directly onto the device! Never use aggressive solvents, chemicals, abrasive cleaners, compressed air or steam cleaners. Information: Displays with a touch screen should be cleaned at regular intervals. Automation Panel 1000 user's manual V2.00...
Page 139: User Tips For Increasing The Service Life Of The Display
Therefore, do not carry out any repairs yourself. Repairs are only permitted to be carried out by authorized qualified personnel at the manufacturer's premises. To process a repair/complaint, please create a repair order or complaint via the B&R Material Return Portal on the B&R website (www.br-automation.com). Automation Panel 1000 user's manual V2.00...
Page 140: Accessories
The following specified characteristic data, features and limit values are only valid for this accessory and may differ from those of the complete system. The data specified for the complete system applies to the complete system in which this accessory is installed, for example. Automation Panel 1000 user's manual V2.00...
Page 141 Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the product family. The cage clamp terminal block cannot be used side by side. The respective limit data of the I/O modules must be taken into account! Automation Panel 1000 user's manual V2.00...
Page 142: Usb Flash Drives
Full speed: Max. 0.9 MB/s High speed: Max. 23 MB/s Endurance SLC flash memory Data retention >10 years Data reliability <1 unrecoverable error per 10 bits read Mating cycles >1500 Table 53: 5MMUSB.2048-01, 5MMUSB.4096-01 - Technical data Automation Panel 1000 user's manual V2.00...
Page 143: Temperature/Humidity Diagram
The maximum ambient temperature is typically derated 1°C per 1000 meters starting at 500 m above sea level. 9.3.1.4 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 144: 5Mmusb.032G-02
Max. 67 mA in sleep mode, max. 122 mA read, max. 141 mA write Ambient conditions Temperature Operation 0 to 70°C Storage -55 to 95°C Transport -55 to 95°C Table 55: 5MMUSB.032G-02 - Technical data Automation Panel 1000 user's manual V2.00...
Page 145: Temperature/Humidity Diagram
The maximum ambient temperature is typically derated 1°C per 1000 meters starting at 500 m above sea level. 9.3.2.4 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Diagram legend Operation T [°C] Temperature in °C RH [%] Relative humidity (RH) in percent and non-condensing Storage and transport Automation Panel 1000 user's manual V2.00...
Page 146: Cables
Table 57: 5CADVI.0018-00, 5CADVI.0050-00, 5CADVI.0100-00 - Technical data Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the product family. Automation Panel 1000 user's manual V2.00...
Page 147 Bend radius Bend radius Connector - Ferrite bead Ferrite bead - Ferrite bead Ferrite bead Ferrite bead Figure 76: Bend radius specification 9.4.1.1.5 Dimensions 40 ±1 25 ±5 Length Figure 77: 5CADVI.0xxx-00 - Dimensions Automation Panel 1000 user's manual V2.00...
Page 148 If you wish to assemble a suitable cable yourself, the cable must be wired according to this pinout. Information: Functionality is only guaranteed for the cables available from B&R. DVI-D (24+1), male DVI-D (24+1), male Cable shield Cable shield Figure 78: 5CADVI.0xxx-00 - Pinout Automation Panel 1000 user's manual V2.00...
Page 149: Sdl Cables
Metal cover with crimped strain relief Locating screw tightening torque Max. 0.5 Nm Electrical properties Conductor resistance 24 AWG ≤93 Ω/km 28 AWG ≤237 Ω/km Table 59: 5CASDL.0008-00, 5CASDL.0018-00, 5CASDL.0050-00, 5CASDL.0060-00, 5CASDL.0100-00, 5CASDL.0150-00, 5CASDL.0200-00, 5CASDL.0250-00, 5CASDL.0300-00 - Technical data Automation Panel 1000 user's manual V2.00...
Page 150 Connector Bend radius Bend radius Connector - Ferrite bead Ferrite bead - Ferrite bead Ferrite bead Ferrite bead Figure 79: Bend radius specification 9.4.2.1.5 Dimensions 35 ±5 40 ±1 Length Figure 80: 5CASDL.0xxx-00- Dimensions Automation Panel 1000 user's manual V2.00...
Page 151 Shielding TMDS data 0 and XUSB1 Not connected XUSB1 negative TMDS data 1 negative XUSB1 positive TMDS data 1 positive TMDS data shield TMDS data 1 and XUSB0 shield TMDS clock positive XUSB0 negative TMDS clock negative Automation Panel 1000 user's manual V2.00...
Page 152: Sdl Cables With 45° Connector
Dimensions Length 1.8 m ±30 mm 5 m ±50 mm 10 m ±100 mm 15 m ±100 mm Diameter Max. 9 mm Max. 11.5 mm Table 61: 5CASDL.0018-01, 5CASDL.0050-01, 5CASDL.0100-01, 5CASDL.0150-01 - Technical data Automation Panel 1000 user's manual V2.00...
Page 153 Bend radius Bend radius Connector - Ferrite bead Ferrite bead - Ferrite bead Ferrite bead Ferrite bead Figure 81: Bend radius specification 9.4.3.1.5 Dimensions 35 ±5 40 ±1 Length Figure 82: 5CASDL.0xxx-01 - Dimensions Automation Panel 1000 user's manual V2.00...
Page 154 Shielding TMDS data 0 and XUSB1 Not connected XUSB1 negative TMDS data 1 negative XUSB1 positive TMDS data 1 positive TMDS data shield TMDS data 1 and XUSB0 shield TMDS clock positive XUSB0 negative TMDS clock negative Automation Panel 1000 user's manual V2.00...
Page 155: Sdl Flex Cables
Gold-plated Mechanical protection Metal cover with crimped strain relief Locating screw tightening torque Max. 0.5 Nm Electrical properties Operating voltage ≤30 V Table 63: 5CASDL.0018-03, 5CASDL.0050-03, 5CASDL.0100-03, 5CASDL.0150-03, 5CASDL.0200-03, 5CASDL.0250-03, 5CASDL.0300-03 - Technical data Automation Panel 1000 user's manual V2.00...
Page 156 Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the product family. 9.4.4.1.4 Bend radius specification Ferrite bead Connector Bend radius Bend radius Connector - Ferrite bead Ferrite bead - Ferrite bead Ferrite bead Ferrite bead Figure 83: Bend radius specification Automation Panel 1000 user's manual V2.00...
Page 157 9.4.4.1.7 Cable pinout Field-assembled cables must be created according to the following assignment. Information: Functionality is only guaranteed for the cables available from B&R. DVI (24+1), male DVI (24+1), male Cable shield Cable shield Automation Panel 1000 user's manual V2.00...
Page 158 Shielding TMDS data 0 and XUSB1 Not connected XUSB1 negative TMDS data 1 negative XUSB1 positive TMDS data 1 positive TMDS data shield TMDS data 1 and XUSB0 shield TMDS clock positive XUSB0 negative TMDS clock negative Automation Panel 1000 user's manual V2.00...
Page 159: Sdl Flex Cables With Extender
Test voltage Wire/Wire 1 kV Wire/Shield 0.5 kV Wave impedance 100 ±10 Ω Conductor resistance 24 AWG ≤95 Ω/km 26 AWG ≤145 Ω/km Insulation resistance >200 MΩ/km Table 65: 5CASDL.0300-13, 5CASDL.0400-13, 5CASDL.0430-13 - Technical data Automation Panel 1000 user's manual V2.00...
Page 160 Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the product family. 9.4.5.1.4 Bend radius specification Ferrite bead Connector Bend radius Bend radius Connector - Ferrite bead Figure 86: Bend radius specification with extender Automation Panel 1000 user's manual V2.00...
Page 161 Accessories 9.4.5.1.5 Dimensions All dimensions in mm. 15.5 110 ±10 Length Figure 87: 5CASDL.xxxx-13 ≥ Rev. E0 - Dimensions 36.5 ±10 37.5 ±2.5 Length Figure 88: 5CASDL.0xx0-13 ≤ Rev. D0 - Dimensions Automation Panel 1000 user's manual V2.00...
Page 162 The SDL flex cable with extender must be connected in the correct direction between the B&R industrial PC and Automation Panel. For this purpose, the signal direction is indicated on the extender unit. B&R industrial PC Figure 90: Example for the signal direction of the SDL flex cable with extender Automation Panel 1000 user's manual V2.00...
Page 163: Sdl3/Sdl4 Cables
Electrical properties Operating voltage ≤100 V ≤125 V Conductor resistance ≤290 Ω/km ≤75 Ω/km Wave impedance 100 ±5 Ω (at 100 MHz) Table 67: 5CASD3.0030-00, 5CASD3.0050-00, 5CASD3.0100-00, 5CASD3.0150-00, 5CASD3.0200-00, 5CASD3.0300-00, 5CASD3.0500-00, 5CASD3.1000-00 - Technical data Automation Panel 1000 user's manual V2.00...
Page 164 Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark. At 20°C ambient temperature. 9.4.6.1.4 Bend radius specification Connector Bend radius Figure 91: SDL3/SDL4 - Bend radius specification 9.4.6.1.5 Dimensions Length Figure 92: 5CASD3.xxxx-00 - Dimensions Automation Panel 1000 user's manual V2.00...
Page 165 Patch cable Patch cable Patch panel Patch panel B&R device B&R device Field-assembled cable Max. 5 m Max. 5 m Max. 100 m Figure 93: Wiring with a field-assembled cable Automation Panel 1000 user's manual V2.00...
Page 166: Usb Cables
If you wish to assemble a suitable cable yourself, the cable must be wired according to this pinout. Information: Functionality is only guaranteed for the cables available from B&R. USB type A, male USB type B, male Jacket Jacket Figure 94: 5CAUSB.00xx-00 USB cables - Pinout Automation Panel 1000 user's manual V2.00...
Page 167: Rs232 Cables
Pollution degree 2 Mechanical properties Dimensions Length 1.8 m ±50 mm 5 m ±80 mm 10 m ±100 mm Diameter Max. 5 mm Bend radius Min. 70 mm Table 71: 9A0014.02, 9A0014.05, 9A0014.10 - Technical data Automation Panel 1000 user's manual V2.00...
Page 168 If you wish to assemble a suitable cable yourself, the cable must be wired according to this pinout. Information: Functionality is only guaranteed for the cables available from B&R. DSUB (9-pin), male DSUB (9-pin), female Jacket Jacket Figure 95: 9A0014.xx RS232 cables - Pinout Automation Panel 1000 user's manual V2.00...
Page 169: Line Filter
Pollution degree per EN 61131-2 Pollution degree 2 Ambient conditions Temperature Operation -25 to 65°C Storage -25 to 65°C Transport -25 to 65°C Mechanical properties Housing Material Galvanized plate Table 73: 5AC804.MFLT-00 - Technical data Automation Panel 1000 user's manual V2.00...
Page 170: Dimensions
• Keep the lines as short as possible (power supply - line filter - end device). • The line filter must be installed on an uncoated, oil-free metallic surface. Line filter End device Figure 98: Connection example Automation Panel 1000 user's manual V2.00...
Page 171: Clamping Blocks
These replacement clamping blocks are used for mounting B&R panel devices. 9.6.1.2 Order data Model number Short description Figure Accessories 5AC900.BLOC-00 Clamping block with swing arms, 10 pcs., replacement part Table 74: 5AC900.BLOC-00 - Order data Automation Panel 1000 user's manual V2.00...
Page 172: 5Ac900.Bloc-01
These replacement clamping blocks are used for mounting B&R panel devices. 9.6.2.2 Order data Model number Short description Figure Accessories 5AC900.BLOC-01 Terminal block without swing arms, 10 pcs; replacement part Table 75: 5AC900.BLOC-01 - Order data Automation Panel 1000 user's manual V2.00...
Page 173: Usb Interface Cover
Accessories 9.7 USB interface cover 9.7.1 5AC900.1201-00 9.7.1.1 General information Flat front-side USB interface cover for Automation Panel 1000, Automation Panel 900, Power Panel 500, Panel PC 700 and Panel PC 800 devices. 9.7.1.2 Order data Model number Short description...
Page 174: 5Ac900.1201-01
Accessories 9.7.2 5AC900.1201-01 9.7.2.1 General information Round front-side knurled USB interface cover (with anti-loss strap) for Automation Panel 1000, Automation Panel 900, Power Panel 500, Panel PC 700 and Panel PC 800 devices. 9.7.2.2 Order data Model number Short description...
Page 175: International And National Certifications
Evaluation of human exposure to electromagnetic fields from short-range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems Automation Panel 1000 user's manual V2.00...
Page 176: Emc Directive
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission stan- dard for industrial environments Information: The declarations of conformity are available on the B&R website under Downloads - Certificates - Declarations of conformity. Automation Panel 1000 user's manual V2.00...
Page 177: Certifications
Eurasian Customs Union (based on EU conformity). 10.2.3 KC Products with this mark are tested by an accredited test laboratory and permitted to be introduced into the Korean market (based on EU conformity). Automation Panel 1000 user's manual V2.00...
Page 178: Rcm
SDL cable - 45-degree connector - 10 m 5CASDL.0100-03 SDL flex cable - 10 m 5CASDL.0150-00 SDL cable - 15 m 5CASDL.0150-01 SDL cable - 45-degree connector - 15 m 5CASDL.0150-03 SDL flex cable - 15 m Automation Panel 1000 user's manual V2.00...
Page 179: Ul Haz. Loc. Certification
0.5 Nm. Cables must be suitable for a surface temperature of 75°C. AP1000 panels with SDL or SDL3 link module are only permitted to be operated with 24 VDC. Automation Panel 1000 user's manual V2.00...
Page 180: Operation
Danger! Failure to follow this instruction can result in death, serious bodily injury or damage to property! Danger ! Le non-respect de ces instructions peut entraîner des blessures graves ou mortelles! Automation Panel 1000 user's manual V2.00...
Page 181: Usb Connection With The Automation Panel 1000
International and national certifications 10.2.6.5 USB connection with the Automation Panel 1000 10.2.6.5.1 Introduction The information below describes the use of USB peripheral devices on the front USB interface of the B&R Automa- tion Panel 1000 in hazardous locations Class I, Division 2, Groups A, B, C and D.
Page 182 The B&R device is suitable for use in Class I, Division 2, Groups A, B, C and D areas. It also provides nonincendive field wiring for devices in Class I, Division 2, Groups A, B, C and D. Automation Panel 1000 user's manual V2.00...
Page 183: Usb Connection With The Sdl Or Sdl3 Link Module
) for the connected device must be greater than or equal to C and L Cable Cable for the nonincendive device with field wiring. The nonincendive device with field wiring must meet the following criteria: Automation Panel 1000 user's manual V2.00...
Page 184 The B&R device is suitable for use in Class I, Division 2, Groups A, B, C and D areas. It also provides nonincendive field wiring for devices in Class I, Division 2, Groups A, B, C and D. Automation Panel 1000 user's manual V2.00...
Page 185: Notes For The Manual Pursuant To Radio Approval
Products with RFM-3-BTW and/or RFM-2-NF boards are approved for use in the USA and Canada. The types can be identified by an adhesive label bearing the appropriate marks - identifiable by the information "Contains FCC ID:" and "Contains IC:". Automation Panel 1000 user's manual V2.00...
Page 186: Environmentally Friendly Disposal
Electronics recycling Operating and monitoring devices Uninterruptible power supplies Batteries and rechargeable batteries Cables Paper/Cardboard packaging Paper/Cardboard recycling Plastic packaging material Plastic recycling Disposal must be carried out in accordance with applicable legal regulations. Automation Panel 1000 user's manual V2.00...
Page 187: Abbreviations
Aluminum front, naturally anodized Touch screen Panel overlay (Frame) Figure 99: Single-touch panel with Autotex panel overlay, naturally anodized The front of the following single-touch panels are coated: • 5AP1120.101E-000 • 5AP1120.121E-000 • 5AP1120.156B-000 Automation Panel 1000 user's manual V2.00...
Page 188 Appendix A Coated front Touch screen Panel overlay (Frame) Figure 100: Single-touch panel with Autotex panel overlay, coated Automation Panel 1000 user's manual V2.00...
Page 189: Autotex Panel Overlay (Polyester)
• Dibutyl phthalate • Sodium bisulphate • Xylene • Diesel • Sodium carbonate Per DIN 42115 Part 2, the panel overlay is resistant to glacial acetic acid for less than one hour without visible damage. Automation Panel 1000 user's manual V2.00...
Page 190: Coated Aluminum Front
• Sidolin • Diesel • Sodium hydroxide < 40% • Skydrol • Acetic acid < 50% • Petroleum The coated aluminum front is not resistant to the following chemicals: • Acetone • Ethyl acetate Automation Panel 1000 user's manual V2.00...
Page 191: Touch Screen
• Lysol • Water • Hydrogen chloride < 6% • Methylbenzene • White wine vinegar • Coca-Cola • Methyl ethyl ketone • Windex Original • Dimethylbenzene • Naphtha • Ethanol • Nitric acid < 70% Automation Panel 1000 user's manual V2.00...
Page 192: Touch Screen
-50 -40 -30 -20 -10 Figure 102: 5-wire AMT touch screen - Temperature/Humidity diagram Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 193: Touch Screen (Multi-Touch Generation 3)
Table 84: Touchscreen 3M - Technical data A.4.2.2 Temperature/Humidity diagram RH [%] T [°C] -50 -40 -30 -20 -10 Diagram legend Operation T [°C] Temperature in °C Storage and transport RH [%] Relative humidity (RH) in percent and non-condensing Automation Panel 1000 user's manual V2.00...
Page 194: Installation Compatibility
The external dimensions of the device types of the respective diagonals are identical. Information: Device designation "AP1000" refers to the Automation Panel 1000 as well as to the Panel PC 900, Panel PC 2100, Panel PC 2200 and Panel PC 3100 with an installed AP1000 panel.
Page 195: Compatibility Details
Installation 566 x 447 dimensions Device designation "AP1000" refers to the Automation Panel 1000 as well as to Panel PCs installed on AP1000 panels. A.5.2 Compatibility details A.5.2.1 Example The dimensions (mm) in the subsequent figures have the following meaning.
Page 196 Figure 105: Installation compatibility - 5.7" devices - Portrait1 The 5.7" Automation Panel 1000 and Power Panel 500 are not 100% compatible with Power Panel 300/400 and Power Panel 100/200 devices in Portrait1 format. Automation Panel 1000 and Power Panel 500 devices need a cutout that is 5.2 mm larger (bottom edge).
Page 197: 10.4" Devices
Figure 107: Installation compatibility - 10.4" devices - Landscape2 10.4" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100% compatible with Power Panel 300/400 or Power Panel 100/200 devices in Landscape2 format. Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices need a cutout that is 4.5 mm larger...
Page 198 Figure 108: Installation compatibility - 10.4" devices - Portrait1 10.4" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100% compatible with Power Panel 300/400 or Power Panel 100/200 devices in Portrait1 format. Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices need a cutout that is 5 mm larger (bottom edge).
Page 199: 12.1" Devices
Figure 109: Installation compatibility - 12.1" devices - Landscape1 12.1" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100% compatible with Power Panel 300/400 or Power Panel 100/200 devices in Landscape1 format. Power Panel 300/400 and Power Panel 100/200 devices need a cutout that is 1.5 mm wider (left and right).
Page 200: 15" Devices
Power Panel 300/400, Automation Panel 900, Panel PC 700 and Panel PC 800 devices in Landscape1 format. Automation Panel 1000 and Power Panel 500 devices need a cutout that is 0.5 mm larger (top and bottom edge). The larger cutout can be used conditionally for all devices: •...
Page 201: 19" Devices
Outer contour of device Cutout for device Figure 113: Installation compatibility - 19" devices - Landscape1 The 19" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Panel PC 800 in Landscape1 format are 100% compatible. Automation Panel 1000 user's manual V2.00...
Page 202: 21.3" Devices
The cutout tolerance for the AP1000 is +0 mm / -0.5 mm. 583 x 464 566 x 447 AP900 Outer contour of device Cutout for device Figure 114: Installation compatibility - 21.3" devices - Landscape1 Automation Panel 1000 user's manual V2.00...
Page 203 Publishing information Automation Panel 1000 user's manual V2.00...
Page 204 Publishing information Publishing information B&R Industrial Automation GmbH B&R Strasse 1 5142 Eggelsberg Austria Telephone: +43 7748 6586-0 Fax: +43 7748 6586-26 office@br-automation.com Automation Panel 1000 user's manual V2.00...

B&R Automation Panel 1000 User Manual

1 Introduction

2 General Safety Guidelines

3 System Overview

4 Technical Data

5 Installation and Wiring

6 Commissioning

7 Software

8 Maintenance

9 Accessories

10 International and National Certifications

11 Environmentally Friendly Disposal

Appendix a

Quick Links

Need help?

Questions and answers

Related Manuals for B&R Automation Panel 1000

Summary of Contents for B&R Automation Panel 1000

This manual is also suitable for:

Table of Contents