B&R Panel PC 2100 User Manual page 315

Model number
Connection cross section
AWG wire
Wire end sleeves with plastic covering
Solid wires
Fine strand wires
With wire end sleeves
Tightening torque
Electrical characteristics
Nominal voltage
Nominal current
4)
Contact resistance
Operating conditions
Pollution degree per EN 61131-2
1) Yes, although applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) Yes, although applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for
the product family.
3) Cage clamp terminal blocks cannot be used side-by-side.
4) The respective limit data for the I/O modules must be taken into account.
Panel PC 2100 user's manual V1.17
0TB103.9
26 to 14 AWG
0.20 to 1.50 mm²
0.4 Nm
Table 281: 0TB103.9, 0TB103.91 - Technical data
0TB103.91
26 to 12 AWG
0.20 to 1.50 mm²
0.20 to 2.50 mm²
0.20 to 2.50 mm²
0.20 to 1.50 mm²
300 V
10 A / contact
≤5 mΩ
Pollution degree 2
Accessories
-
315