Procedure In Efi Shell - B&R Panel PC 2100 User Manual

Software

4.2.1.2 Procedure in EFI shell

Caution!
The PC is not permitted to be switched off or reset while performing an update!
1. Download the ZIP file from the B&R website (www.br-automation.com).
2. Unzip the ZIP file and copy the data to a USB flash drive formatted in FAT16 or FAT32. Alternatively, a CFast
card can be used.
3. Reboot the PC and select "UEFI: Internal shell" as the boot device (press key "F5" to open the boot menu).
4. After the EFI shell is booted, "startup.nsh" is executed and the BIOS upgrade is started.
5. The system must be rebooted after a successful upgrade.
6. Reboot and press "F2" to enter BIOS Setup and load the setup defaults; then select "Save changes and exit".
272 Panel PC 2100 user's manual V1.17