YASKAWA Sigma-V Series User Manual page 78

3 Utility Function Mode
3.3.12 Manual Gain-adjustment of Analog Monitor Output (Fn00D)
(3) Operation Keys
Functions (The disabled keys are not included.)
Note: 1. Pressing the
3-36
Resets the alarm. The alarm cannot be reset unless the cause of alarm is cor-
rected.
Returns to the main menu of Utility Function Mode.
Switches the channel for gain adjustment between CH1 and CH2.
Increases the setting value for the channel by one by pressing the
and decreases by pressing the
The setting value is validated immediately, however, it will not be saved in the
SERVOPACK unless the
Saves the setting values (both for CH1 and CH2) in the SERVOPACK.
After the saving is completed, "Done" is displayed in the status display.
or
is always the digit to be edited.
2. In the factory setting, CH1 is for the torque reference monitor and CH2 is for the
motor speed monitor.
Key.
Key is pressed.
Key does not change the cursor position. The lowest digit
Key,