YASKAWA Sigma-V Series User Manual page 31

• Key
Press the
The saved display appears automatically the next time the power is turned ON.
B B
U n 0 0 0 = 0 0 0 0 0 0
U n 0 0 2 = 0 0 0 0 0 0
U n 0 0 5 =
U n 0 0 6 =
B B
U n 0 0 0 = 0 0 0 0 0 0
U n 0 0 2 = 0 0 0 0 0 0
U n 0 0 5 =
U n 0 0 6 =
Note: Do not turn OFF the SERVOPACK's control power while saving. If the SERVOPACK's
control power is turned OFF while saving, the saving process will be canceled. If the
saving failed, the factory setting items will be displayed again. No alarm occurs.
(1) Operation Example
The procedure for the saving display is as follows:
Select Un000 (Motor speed) on the first line, Un002 (Internal torque reference)
on the second line, Un005 (Input signal monitor) on the third line, and Un006
(Output signal monitor) on the fourth line, and then save the display.
The following example shows when changing the displayed factory setting
items.
B B
U n 0 0 0 =
U n 0 0 2 =
U n 0 0 5 =
U n 0 0 6 =
Key to save the display.
− P R M / M O N −
The LED on the key blinks in red while saving.
− P R M / M O N −
− P R M / M O N −
0 0 0 0 0 0
0 0 0 0 0 0
Motor speed
Internal torque reference
Input signal monitor
Output signal monitor
2.1 Monitor Mode
2-7
2