YASKAWA Sigma-V Series User Manual page 36

2 Parameter/Monitor Modes
2.2.3 Parameter Display and Setting
(2) Operation Keys
Functions
Function Details
•
P n 0 0 0 =
P n 0 0 0 = n .0 0 1 0
2-12
Resets the alarm. (The alarm cannot be reset unless the cause of the alarm is
corrected).
Switches to the Utility Function Mode.
Switches the cursor position between the parameter number and its setting.
Writes the setting in the SERVOPACK.
Moves the cursor position upward.
Disabled.
Moves the cursor position to the left or right.
Switches "Un" to/from "Pn."
Disabled.
Saves the display with selected items.
and Keys
When the cursor is on the left side (parameter number side), press
the or Key to move the cursor as follows.
P n 0 0 0 =
When the cursor is on the right side (setting side), press the
move the cursor as follows.
= n .0 0 1 0
P n 0 0 0 =
P n 0 0 0 =
= n. 0 0 1 0
P n 0 0 0 =
or
= n.0 0 1 0
= n.0 0 1 0
Key to