YASKAWA Sigma-V Series User Manual page 145

Step
R U N
M e a s u r e
I n p u t = 0 1 5 %
5
Press the
motor and start the frequency measurement.
Note: "Measure" is displayed during the measurement.
R U N
R e s u l t
I n p u t = 0 1 5 %
R e s =
F i l t e r 1
When the detection processing has completed normally, the result and the notch filter
value to be set are displayed.
6 Press the
Note: 1. If a notch filter has been set and is being used, "∗" is displayed on the second
line.
If the first stage notch filter has been set, the second stage notch filter value is
displayed. If the first and second stage notch filters have been set, only the
result of frequency detection is displayed.
2. If the
stop, and the frequency detection will be canceled.
3. If the detection processing is not completed normally, "No Measure" is dis-
played.
R U N
R e a d y
I n p u t = 0 1 5 %
7
Press the
tor is turned OFF and the display returns to the Utility Function Mode main menu.
Press the
3.3 Operation Method for Each Utility Function
Display Example and Description
− E a s y F F T −
(forward run start) Key or
− E a s y F F T −
1 2 5 0 H z
1 2 5 0 H z
Key after the detection to turn OFF the power to the servomotor (BB).
Key is pressed while the servomotor is running, the servomotor will
− E a s y F F T −
Key to exit the EasyFFT function at this stage. The power to the servomo-
Key to return to "Ready" display.
(reverse run start) Key to run the servo-
9 3
3-103