YASKAWA Sigma-V Series User Manual page 109

Step Display Example
R U N
3
M O D E = O N
R U N
4
L e v e l = 4
R U N
5
L e v e l = 3
R U N
6
L e v e l = 3
D o n e
7
L e v e l = 3
R U N
F n 0 8 0 : P o l e D e t e c t
8
F n 2 0 0 : T u n e L v l S e t
F n 2 0 1 : A A T
F n 2 0 2 : R e f − A A T
3.3 Operation Method for Each Utility Function
− T u n e L v l S e t −
− T u n e L v l S e t −
− T u n e L v l S e t −
− T u n e L v l S e t −
− T u n e L v l S e t −
− F U N C T I O N −
Description
Press the or Key to select a mode.
Note: If overshoot or vibration occurs, or the
load is larger than the allowable load
moment, select "ON." If mechanical
resonance occurs, select "OFF."
Press the Key. A level will appear.
Press the or Key to select a level.
If vibration noise occurs, lower the setting
value.
Note: If overshoot or vibration occurs, or the
load is larger than the allowable load
moment, select "ON." If vibration
noise occurs, select "OFF."
Press the Key to cancel the automati-
cally set notch filter.
Press the Key, and "Done" will blink in
the status display. Then, the setting will be
stored to the SERVOPACK.
Press the Key.
The display returns to the Utility Function
Mode main menu.
9 3
3-67