Parameter Mode; Definition Of Parameter Display - YASKAWA Sigma-V Series User Manual

2.2

Parameter Mode

This section describes how to display and set parameters in the Parameter/
Monitor Mode.
Note: The details of parameters are not described in this manual. For more information on
parameters, refer to manuals listed in
2.2.1

Definition of Parameter Display

The definition of parameter display used in this manual is as follows:
• To indicate a specific digit of the parameters whose each digit has a meaning
and has to be set, the digit number is added to the parameter number. For
example, "Pn001 = n.
• "0" of the higher digits of the factory setting of parameters other than above
are omitted. For example, when the factory setting "0040.0," expressed as
"40.0."
Related Manuals on page iv.
0." (the digit number 0 of parameter Pn001)

2.2 Parameter Mode

2-9
2