YASKAWA Sigma-V Series User Manual page 57

(3) Operation Keys
Functions (The disabled keys are not included.)
Resets the alarm. The alarm cannot be reset unless the cause of alarm is cor-
rected.
Returns to the main menu of Utility Function Mode.
When the
the
is turned OFF.
When the servo is OFF (BB): Switches the editing line. (Same as for
When the servo is ON (RUN): Disabled.
Switches the servo ON from/to OFF.
In the status display, "BB" is displayed when the servo is OFF, "RUN" is dis-
played when the servo is ON.
When the servo is OFF (BB): Edits the parameter. (Same as for Parameter/
When the servo is ON (BB): Disabled.
When the servo is OFF (BB): Changes the parameter number, monitor mode
When the servo is ON (RUN): Rotates the servomotor at the speed 60 min
Note: 1. If Pn000.0 (Direction Selection) is set to "1," the direction of rota-
When the servo is OFF (BB): Moves the cursor to the left or the right. (Same
When the servo is ON (RUN): Disabled.
Saves the display with the selected items.
3.3 Operation Method for Each Utility Function
Key is pressed while the servo is ON by pressing
Key, the Utility Function Mode main menu reappears after the servo
Parameter/Monitor Mode display)
Monitor Mode display)
number, and parameter setting. (Same as for
the direction to counterclockwise (CCW) by
pressing the
pressing the
tion is reversed.
2. The servomotor continues rotating as long as the key is pressed, and
stops when the key is released. Keep pressing the key until the ser-
vomotor stops to stop the servomotor at the detected phase-C posi-
tion.
as for Parameter/Monitor Mode display)
Parameter/Monitor Mode display)
Key, or clockwise (CW) by
Key for positioning to the
phase C.
-1
in
9 3
3-15