About This Manual - YASKAWA Sigma-V Series User Manual

About this Manual

This manual provides the users of the Σ-V series of SGM S/SGDV servodrives with
an explanation of the digital operator (Model: JUSP-OP05A-1-E) and its features,
including the following items:
• Functions and connection method
• Parameters and monitor mode
• Utility function mode
• Parameter copy mode
Intended Audience
This manual is intended for the following users.
• Those performing trial operation or adjustments of Σ-V Series servodrives.
• Those maintaining or inspecting Σ-V Series servodrives.
Description of Technical Terms
The terms in this manual are defined as follows:
• Servomotor or motor = Σ-V Series SGMAV, SGMJV, SGMGV, SGMCS (direct
drive), SGLGW, SGLFW, SGLTW, or SGLCW servomotor.
• SERVOPACK = Σ-V Series SGDV SERVOPACK.
• Servodrive = A set including a servomotor and servo amplifier.
• Servo System = A servo control system that includes the combination of a servo-
drive with a host computer and peripheral devices.
Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written
with a forward slash (/) before the signal name, as shown in the following example:
• S-ON = /S-ON
• P-CON = /P-CON
Outline of the Contents
Chapter
1. Outline
2. Parameters and
Monitor Modes
3. Utility Function
Modes
4. Parameter Copy
Modes
Describes the outline of the function, how to connect, and parts
names of JUSP-OP05A-1-E digital operator.
Describes how to operate the Parameter Mode and Monitor Mode.
Describes how to operate the Utility Function Mode.
Describes how to operate the Parameter Copy Mode.
Description
iii