YASKAWA Sigma-V Series User Manual page 53

(3) Operation Keys
Functions (The disabled keys are not included.)
Resets the alarm. The alarm cannot be reset unless the cause of alarm is cor-
rected.
Returns to the main menu of Utility Function Mode.
If the
the Utility Function Mode main menu reappears after the servo is turned OFF.
When the servo is OFF (BB): Switches the editing line. (Same as for
When the servo is ON (RUN): Disabled.
Switches the servo ON from/to OFF.
In the status display field, "BB" is displayed when the servo is OFF, "RUN" is
displayed when the servo is ON.
When the servo is OFF (BB): Edits the parameter. (Same as for Parameter/
When the servo is ON (RUN): Disabled.
When the servo is OFF (BB): Changes the parameter number, monitor mode
When the servo is ON (RUN): Rotates the servomotor at the JOG speed
Note: 1. If Pn000.0 (Direction Selection) is set to "1," the direction of rota-
When the servo is OFF (BB): Moves the cursor to the left or the right. (Same
When the servo is ON (RUN): Disabled.
Saves the display with the selected items.
3.3 Operation Method for Each Utility Function
Key is pressed while the servo is ON by pressing the
Parameter/Monitor Mode display)
Monitor Mode display)
number, and parameter setting. (Same as for
Parameter/Monitor Mode display)
tion is reversed.
2. The servomotor continues rotating as long as the key is pressed, and
stops when the key is released.
as for Parameter/Monitor Mode display)
(Pn304) counterclockwise (CCW) by pressing
the Key, or clockwise (CW) by pressing
the Key.
Key,
9 3
3-11