YASKAWA Sigma-V Series User Manual page 21

1.3 Part Names and Functions
(2) Operation Keys
Operation Key Main Function
Resets the alarm. (The alarm cannot be reset unless the cause of the alarm
is removed.)
Switches the Display Mode of digital operator.
Switches the cursor position between the parameter number and the set-
ting when setting a parameter.
Opens the selected utility function display in Utility Function Mode.
Moves the cursor up or down in Parameter/Monitor Mode.
Turns the servo ON or OFF at JOG operation.
Moves the cursor to left or right in Parameter/Monitor Mode.
Increases or decreases the parameter number, setting data, monitor num-
ber, and utility function number. Or, rotates the servomotor in forward or
reverse direction at JOG operation.
In Parameter Copy Mode, reads parameters saved in the SERVOPACK to
the digital operator.
In Parameter Copy Mode, writes parameters in the digital operator to the
SERVOPACK.
In Parameter/Monitor Mode, saves the status of the display to the digital
operator.
1
1-5