YASKAWA Sigma-V Series User Manual page 24

1 Introduction
<INFO> Other Alarm Displays
If a communications error occurs between the SERVOPACK and digital oper-
ator, the following communications error codes are displayed. These errors
may be caused by incorrect connector connection. Check the connection and
correct it. Then, turn the power OFF and ON. If the communications error
message still appears, replace the digital operator or the SERVOPACK.
C P F 0 0 C P F 0 1
C O M − E R R ( O P & S V ) C O M − E R R ( O P & S V )
1-8