Table of Contents
Advertisement
VERSION 05/2017
OPERATING MANUAL
8
CLEANING AND MAINTENANCE
8.1
CLEANING
8.1.1 CLEANING STAFF
Cleaning work should be undertaken regularly and carefully by qualifi ed and trained staff .
They should be informed of specifi c hazards during their training.
The following hazards may arise during cleaning work:
– Health hazard from inhaling powder lacquer
– Use of unsuitable cleaning tools and aids
8.1.2 FLUSHING AND CLEANING THE SYSTEM
The cleaning intervals should be adapted by the operator depending on the level of use
and if necessary the level of soiling.
If in doubt, we recommend contacting WAGNER's specialist personnel.
8.2
MAINTENANCE
8.2.1 MAINTENANCE STAFF
Maintenance work should be undertaken regularly and carefully by qualifi ed and trained
staff . They should be informed of specifi c hazards during their training.
The following hazards may arise during maintenance work:
– Health hazard from inhaling powder lacquer
– Use of unsuitable tools and aids
An authorized person must ensure that the device is checked for being in a reliable state
after maintenance work is completed.
8.2.2 MAINTENANCE INSTRUCTIONS
DANGER
Incorrect maintenance/repair!
Danger to life and equipment damage.
Only a WAGNER service center or a suitably trained person may carry out repairs and
replace parts.
Only repair and replace parts that are listed in the "Spare parts" chapter and that are
assigned to the unit.
Before all work on the device and in the event of work interruptions:
- Switch off the energy and compressed air supply.
- Relieve spray gun and device pressure.
- Secure the spray gun against actuation.
Observe the operating and service manual for all work.
ORDER NUMBER DOC 2354920
SPRINT XE
50
Hide quick links:
Advertisement
Table of Contents
