Ventilation Of The Spray Booth; Air Supply; Product Supply - WAGNER GM 4700AC Operating Manual

VERSION 06/2014
OPERATING MANUAL
6.4.2

VENTILATION OF THE SPRAY BOOTH

Toxic and/or fl ammable vapor mixtures!
Risk of poisoning and burns
6.4.3

AIR SUPPLY

The use of an air fi lter with air regulator (D) ensures that only dry, clean atomizing air gets
into the spray gun! Dirt and moisture in the atomizing air worsens the spraying quality and
spraying pattern.
6.4.4

PRODUCT SUPPLY

Impurities in the spraying system!
Spray gun blockage, materials harden in the spraying system
Flush the spray gun and paint supply with a suitable fl ushing agent.
Bursting hose, bursting threaded joints!
Danger to life from injection of product
ORDER NUMBER DOC2311730
WARNING
Operate the device in a spray booth approved for the working
materials.
– or –
Operate the device on an appropriate spraying wall with the
ventilation (extraction) switched on.
Observe national and local regulations for the outgoing air
speed.
NOTICE
WARNING
Ensure that the hose material is chemically resistant to the
sprayed products.
Ensure that the spray gun, threaded joints, and product hose
between the device and the spray gun are suitable for the
pressure generated in the device.
Ensure that the following information can be seen on the high-
pressure hose:
- Manufacturer
- Permissible operating pressure
- Date of manufacture
GM 4700AC
24