Table of Contents
Advertisement
Operating manual Manual Powder System SPRINT XE
6 Assembly and Commissioning
25Nm;
18.44lb ft
P_02643
1. Open transport packaging with care and carefully take all individual parts out of
packaging.
2. Place lower trolley section (1) on a clean, level surface.
3. Place upper trolley section (2) on the two guide sleeves on the lower trolley section (1),
press down gently until stop is reached and use nuts and bolts (see detail) to screw to
lower trolley section (tightening torque 25 Nm; 18.44 lb ft).
4. Mount the gun holder (3) (see separate assembly manual).
6.4.2 Assembling the control unit
3
1
2
P_02644
4 Carefully take control unit (1) out of packaging and use the supplied screws (2) to screw
into the holes drilled in the angle bracket (3).
ð Control unit is flush with the cover at the front.
26
3
2
1
4
Order number 2354920 | Edition 01/2023
Advertisement
Table of Contents
