Pepperl+Fuchs HD2-DM-A Manual page 91

Advanced Diagnostics
FDS/OPC Integration
Oscilloscope Toolbar
Button
Oscilloscope Shortcuts
Button
All tools
All tools
Name
Move
Horizontal marker
Vertical marker
Rectangular marker
Marker measurement
Zoom in
Scale 1:1
Zoom out
Analysis
Shortcut
Drag while left mouse button
is pressed
Double-click left mouse button Sets the maximum cursor to
Double-click right mouse but-
ton
Double-click on telegram in
overview section
CTRL + mouse wheel
Result
Grip and move the graph.
Press and hold the left mouse
button.
Measure the time difference.
Press left mouse button to set
the first marker and press the
right mouse button to set the
last marker.
Measure the voltage differ-
ence. Press the left mouse
button to set the upper marker
and press the right mouse but-
ton to set the lower marker.
Measure time and voltage dif-
ference. Press and hold the
left mouse button to set the
rectangular marker.
Measure the time and voltage
at one point.
Enlarge the view of the graph.
See 1:1 graph size.
Reduce the view of the graph.
On/Off different view of the
graph.
Different Layers: 1-bit level, 1
section, 2 short, 2 full
Result
Move the waveform to the
left/right.
the maximum value of the cur-
rently visible part of the wave-
form.
Sets the minimum cursor to
the minimum value of the cur-
rently visible part of the wave-
form.
Shows the complete frame in
detail/zoom-in view.
Increases/decreases the
zoom factor.
91