Table of Contents
Advertisement
Advanced Diagnostics
FOUNDATION Fieldbus Integration
Creating a Snapshot
In order to create a snapshot, proceed as follows:
1.
Right-click the Advanced Diagnostic Module in the project section.
2.
Choose Measured value.
The system & segment measurements window appears.
3.
Choose Create Snapshot or Create Snapshot including Oscilloscope Recordings.. The
second option includes characteristic oscilloscope recording fragments for each field device
into the report.
Once all snapshot data is collected, the Save Snapshot Report window appears.
Figure 6.7
4.
Enter a description for the snapshot.
5.
Choose Save to save the snapshot.
The snapshot explorer window appears. See chapter 6.8.7
6.8.6
History Export
Note
In order to export history data, an Ethernet connection to the DGW-FF is required.
122
Save snapshot report window
Advertisement
Table of Contents
