Pepperl+Fuchs HD2-DM-A Manual page 162

Advanced Diagnostics
Appendix
Parameter
OUTPUT_-
SOURCE
ON_OFF_-
SET-
TINGS_1/
ON_OFF_-
SET-
TINGS_2/
ON_OFF_-
SET-
TINGS_3/
ON_OFF_-
SETTINGS_4
SERI-
AL_USAGE
Char. Description
Record, W, S,
RELAY_OUTPUT_1
OOS • Not connected: The value of the output is the same as
defined if the IO_TB is in OOS mode
• FF channel: The output value is provided through an FF
channel
• BINARY_INPUT_1-8: Binary input 1 ... 8
• ON_OFF_CONT_1-4: On/off controller 1 ... 4
• Field diagnostics Fail: The output is set to 1 if a field diag-
nostics Fail alarm is active
• Field diagnostics Fail Inverted: Same as FD Fail but output
value is inverted
• Field diagnostics Out of Spec: The output is set to 1 if a
field diagnostics Fail or Out of Specification alarm is active
• Field diagnostics Out of Spec Inverted: Same as FD Out of
Specification but output value is inverted
• Field diagnostics MR: : The output is set to 1 if a Field diag-
nostics Fail, Out of Specification, or Maintenance Required
alarm is active
• Field diagnostics MR Inverted: Same as FD MR, but output
value is inverted
• Field diagnostics Check: The output is set to 1 if a field
diagnostics Fail, Out of Specification, Maintenance
Required, or Check function alarm is active
• Field diagnostics Check Inverted: Same as FD Check, but
output value is inverted
RELAY_OUTPUT_2
See RELAY_OUTPUT_1
BUZZER_OUTPUT
See RELAY_OUTPUT_1
COMMON_ALARM_OUTPUT
See RELAY_OUTPUT_1
Record, W, S,
INPUT
OOS Selects the input value for the on/off controller
• Temperature input 1
• Temperature input 2
• Temperature difference (Temperature input 2 – tempera-
ture input 1)
• Motherboard temperature
• Motherboard humidity
• Frequency input 1
• Frequency input 2
ON_LEVEL
If input value > ON_LEVEL, then output value = 1
OFF_LEVEL
If input value < OFF_LEVEL, then output value = 0
OPTIONS
Invert: Inverts controller output.
For internal usage
161