Pepperl+Fuchs HD2-DM-A Manual page 62

Advanced Diagnostics
FDS/OPC Integration
11.
If the diagnostic gateway is located in a different subnet, enter its IP address in the Remote
subnet IP address field and choose Add.
Then choose Update to find all diagnostic gateways in the subnet.
To identify a gateway in the cabinet, select the gateway from the list and choose Locate
selected gateway(s).
Figure 5.21
12.
Select the gateways to include in the project from the list of available gateways.
13.
If required, you can set scan limits for the address range of the diagnostic devices in the Lower
Scan Limit and Upper Scan Limit fields. Only HD2-DM-A addresses within the set limit will
be scanned. This option can speed up the scanning process if only a few HD2-DM-A modules
within a small address range are used in a project.
14.
Choose Next.
The topology scan function scans for diagnostic modules within the restricted address
range and builds up the diagnostic topology automatically.
5.4.7 Import of Diagnostic Project from File
The "Import from file" option is typically used for the advanced diagnostic module (ADM) inte-
gration package available for the major process control systems (PCS). See the application
notes for the ADM integration packages for details.
Importing the Configuration from File
Before you start, ensure that the FieldConnex
diagnostic manager is installed, and that the PACTware
1.
Start PACTware
2.
Open a PACTware
3.
Choose View > Device Catalog to open the device catalog.
4.
Open the PEPPERL+FUCHS GmbH device folder.
Figure 5.22
5.
Select the Driver folder.
Figure 5.23
62
Scanned gateways
TM
.
TM
diagnostic project.
TM
Structure in the PACTware
Device overview of the Driver folder
®
diagnostic server (FDS) is running, the latest
TM
device catalog is up-to-date.
device catalog