Pepperl+Fuchs HD2-DM-A Manual page 59

Advanced Diagnostics
FDS/OPC Integration
Figure 5.11
5.
Choose Apply to confirm changed settings.
IP address and tag of the Diagnostic Gateway are assigned to the port.
Assigning Diagnostic Gateway Addresses (Option 2)
1.
Right-click the FieldConnex
2.
Right-click the FieldConnex
3.
Select the FDS Topology tab.
Figure 5.12
4.
Select the Unassigned Diagnostic Gateways entry in the topology structure.
Figure 5.13
5.
Choose Update in the Unassigned Diagnostic Gateways area.
All Diagnostic Gateways located within the subnet are shown in the table.
Figure 5.14
Port Properties
®
Diagnostic Server in the project area and choose Connect.
®
Diagnostic Server in the project area and choose Parameter.
FDS Topology tab
Unassigned Diagnostic Gateway
All Gateways
59