Pepperl+Fuchs HD2-DM-A Manual page 65

Advanced Diagnostics
FDS/OPC Integration
Setting the Snapshot Archive Location
To change the snapshot archive location, proceed as follows:
1.
Right-click the FieldConnex
Parameter.
2.
Select Manual Configuration (HD2-DM-A only) in the snapshot file location section.
Figure 5.28
3.
Enter the directory for the snapshot data in the Snapshot File Path field.
4.
Choose Apply to confirm changed settings.
The snapshot data will be stored in the Snapshot.mdb file, which is automatically created
in the dedicated snapshot directory.
5.5 Operation with Device Type Managers (DTM)
The FDT/DTM based diagnostic manager is the graphic interface for the user of advanced
diagnostic modules (ADM). The ADM contains all configuration settings, diagnostic informa-
tion, and device functionalities.
Before reading this chapter on the functionality of the diagnostic manager DTMs, see chapter 2
and see chapter 8.10.
Note
Some functions and features are available only if the latest firmware version is installed on the
HD2-DM-A module. A firmware supporting all features is integrated with this DTM and can be
installed on any HD2-DM-A hardware. See chapter 7.11
Note
Ensure that the directory where the snapshots will be saved already exists.
® Diagnostic Server in the project section and choose
Snapshot location
65