Pepperl+Fuchs HD2-DM-A Manual page 78

Advanced Diagnostics
FDS/OPC Integration
2.
Choose Measured value.
The system & segment measurements window appears.
Figure 5.46
3.
Choose Create Snapshot or Create Snapshot including Oscilloscope Recordings. The
second option adds characteristic oscilloscope recording fragments for each field device to the
report.
Once all snapshot data is collected, the Save Snapshot Report window appears.
Figure 5.47
4.
Enter a description for the snapshot.
5.
Choose Save to save the snapshot.
The snapshot explorer window appears. See chapter 5.9
5.9 Snapshot Explorer
The snapshot explorer simplifies administration and enables the printout of existing snapshots
and reports. These reports can be printed or exported as an image, text, PDF document, or
diagnostic module snapshot (DMS) file. See chapter 5.8.5
Note
DMS is a file format for data exchange created by Pepperl+Fuchs.
78
Create snapshot button
Save snapshot report window