Pepperl+Fuchs HD2-DM-A Manual page 50

Advanced Diagnostics
FDS/OPC Integration
5.1 Installation of Diagnostic Manager with PACTware
Installing the Diagnostic Manager with PACTware
Make sure you downloaded the software bundle that includes the diagnostic manager and all
its tools and accessories, including PACTware
diagnostic gateway configuration tool from www.pepperl-fuchs.com. To install the diagnostic
manager, proceed as follows:
1.
Extract the software bundle to a local directory.
2.
Go to the directory that includes the extracted files and run autorun.exe to start the installation
wizard.
3.
Select the software components you want to install and choose Install selected
application(s).
We recommend that you install all components.
4.
In order to install the Microsoft
dialog.
5.
In order to install PACTware
6.
In order to install the diagnostic manager, follow the instructions of the installation dialog.
Note that during the installation of the diagnostic manager, the diagnostic server and the OPC
server are installed automatically.
7.
After the selected components have been installed, choose Quit to leave the installation
wizard.
The diagnostic manager and PACTware
8.
Run PACTware
9.
Choose View > Device catalog.
10.
Choose Update device catalog in the device catalog section.
Figure 5.1
11.
Choose Yes to create a new PACTware
12.
Choose Extras > Options.
13.
Set the Use memory-optimized project management check box.
14.
Choose OK.
15.
Choose File > Exit to quit PACTware
PACTware
Caution!
Network Connection Problems
The diagnostic server cannot connect to the network.
After the setup is complete, disable the Windows
50
®
.NET framework, follow the instructions of the installation
TM
, follow the instructions of the installation dialog.
TM
.
Update device catalog
TM
TM
is ready for use.
TM
TM
, the FieldConnex
TM
have now been installed.
TM
device catalog.
.
®
firewall for the diagnostic server.
TM
®
diagnostic server, and the