Table of Contents
Advertisement
Advanced Diagnostics
FDS/OPC Integration
5.
Select the Driver folder.
Figure 5.26
6.
Drag the FieldConnex
PC entry in the project section.
7.
Right-click the FieldConnex
8.
Right-click the FieldConnex
functions > Topology Scan and Import.
9.
Select Read from FDS.
Figure 5.27
10.
Choose Next.
The wizard displays the configuration and the changes that will be made in your active proj-
ect.
11.
Choose Next to confirm the changed settings and follow the instructions of the wizard.
5.4.9
Set Snapshot Archive Location
By default, snapshots are stored in the diagnostic manager project file. For large fieldbus instal-
lations with many diagnostic devices, this project file increases rapidly. This can make file han-
dling complicated.
Caution!
Large Project Files
Large project files may cause the software to slow down. We recommend that you store snap-
shot data in an external file if the expected number of snapshots exceeds 4 000.
Caution!
Data Loss
Once the snapshot data has been stored in an external file, it cannot be stored in the project file
again without losing the externally stored snapshots.
To prevent data loss, establish a backup solution for the external snapshots.
64
Device overview of the Driver folder
®
Diagnostic Server entry from the device catalog section on the HOST
®
Diagnostic Server in the project section and choose Connect.
®
Diagnostic Server in the project section and choose Additional
Topology scan or import source - Read from FDS
Advertisement
Table of Contents
