Pepperl+Fuchs HD2-DM-A Manual page 81

Advanced Diagnostics
FDS/OPC Integration
Opening the Advanced Parameterization
In order to open the advanced parameterization window, proceed as follows:
1.
Right-click the Advanced Diagnostic Module in the project section.
2.
Choose Additional Functions > Advanced Parameterization.
The advanced parameterization window appears.
Figure 5.49
1 General diagnostic module information
2 Function tabs
3 Segment/field devices selectable via tree. The preceding icon shows diagnostic state of
field device.
4 Field device handling see chapter 5.10.1
Opening the Parameterization
To open the parameterization window, proceed as follows:
1.
Right-click the Advanced Diagnostic Module in the project section and choose Disconnect.
4
3
Advanced parameterization start window
1
2
81